Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
When heated, vapors from 1. Turn heater off when using within burner box or on adjacent furniture polish, wax, carpet furniture polish, wax, carpet walls or furniture cleaners, etc. may turn into cleaners or similar products white powder residue 111487-01E TROUBLESHOOTING Continued WARNING: If you smell gas • Shut off gas supply. • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. • If you cannot reach your gas supplier, call the fire department. IMPORTANT: Operating heater where impurities in air exist may create odors. Cleaning supplies, paint, paint remover, cigarette smoke, cements and glues, new carpet or textiles, etc., create fumes. These fumes may mix with combustion air and create odors. These odors will disappear over time. OBSERVED PROBLEM POSSIBLE CAUSE REMEDY or shut off Heater ping noise just after roduces a clicking/tickburner is lit 1. Metal expanding while heating or contracting while cooling 1. This is common with most heaters. If noise is excessive, contact qualified service person Heater odors produces unwanted 1. Heater burning vapors from paint, hair spray, glues, cleaners, chemicals, new carpet, etc. (See IMPORTANT statement above) 2. Gas leak. See Warning statement at top of page 1. Open window and ventilate room. Stop using odor causing products while heater is running 2. Locate and correct all leaks (see Checking Gas Connections, page 11) Heater shuts off in use (ODS 1. Not enough fresh air is 1. Open window and/or door for operates) available ventilation 2. Low line pressure 2. Contact local natural or pro- pane/LP gas company 3. ODS/pilot is partially 3. CleanODS/pilot(see Cleaning clogged and Maintenance, page 14) Gas odor even when control knob 1. Gas leak. See Warning 1. Locate and correct all leaks is in OFF position statement at top of (see Checking Gas Connecpage tions, page 11) 2. Control valve defective 2. Replace control valve Gas odor during combustion 1. Foreign matter between con1. Take apart gas tubing and trol valve and burner remove foreign matter 2. Gas leak. See Warning 2. Locate and correct all leaks statement at top of (see Checking Gas Connecpage tions, page 11) 111487-01E SPECIFICATIONS PARTS UNDER WARRANTY CSBPT, CSPBPT, CSPIPT (Includes 111485-01 Burner Chassis) Btu (Variable) 16,000/30,000 Type Gas Propane/LP Only Ignition Piezo Pressure Manifold 8" W.C. Inlet Gas Pressure (in. of water) Maximum 14" Minimum* 11" Shipping Weight 265 lbs. * For input adjustment CSBNT, CSPBNT, CSPINT (Includes 111485-02 Burner Chassis) Btu (Variable) 16,000/30,000 Type Gas Natural Gas Only Ignition Piezo Pressure Manifold 3.5" W.C. Inlet Gas Pressure (in. of water) Maximum 10.5" Minimum* 5" Shipping Weight 265 lbs. * For input adjustment SERVICE HINTS When Gas Pressure Is Too Low • pilot will not stay lit • burners will have delayed ignition • heater will not produce specified heat • propane/LP gas supply may be low You may feel your gas pressure is too low. If so, contact your local propane/LP gas supplier. TECHNICAL SERVICE You may have further questions about installation, operation or troubleshooting. If so, contact DESA Heating Products.Technical Service Department at 1-866-672-6040. When calling, please have your model and serial numbers of your heater ready. You can also visit DESAHeating Products.technical service web site at REPLACEMENT PARTS Note: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty. Contact authorized dealers of this product. If they can.t supply original replacement part(s), call DESA Heating Products. Technical Service Department at 1-866-672-6040. When calling DESA Heating Products, have ready • your name • your address • model and serial numbers of your heater • how heater was malfunctioning • type of gas used (propane/LP or natural gas) • purchase date Usually, we will ask you to return the part to the factory. PARTS NOT UNDER WARRANTY Contact authorized dealers of this product. If they can.t supply original replacement part(s), either contact your nearest Parts Central (see page 23) or call DESAHeating Products at 1-866-672-6040 for referral information. When calling DESA Heating Products, have ready • model number of your heater • the replacement part number ACCESSORIES Purchase these heater accessories from your local dealer. If they can not supply these accessories, call DESA Heating Products at 1-866-672-6040 for referral information. You can also write to the address listed on the back page of this manual. EQUIPMENT SHUTOFF VALVE GA5010 For all models. Equipment shutoff valve with 1/8" NPT tap. Fits 1/2" NPT pipe. CLEANING KIT - CCK (Not Shown) For all models. Your vent-free gas appliance requires regular cleaning and maintenance to prevent performance problems. This ...
Эта инструкция также подходит к моделям:Плиты - CSBNT (1.04 mb)
Плиты - CSBPT (1.04 mb)
Плиты - CSPBNT (1.04 mb)
Плиты - CSPINT (1.04 mb)