Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
(Figure C) 5 Remove (4) Phillips screws securing the radio. 6 Remove (4) Phillips screws securing the climate control to the factory trim panel. A C 1 99-7339 KIT PREPARATION KIT PREPARATION HYUNDAI GENESIS COUPE 2010 1 Attach the climate control to the 957336S trim plate using the factory hardware. (Figure A) 2 Attach the (6) panel clips to the 957336S trim plate. (Figure B) A Continue to kit assembly 2 99-7339 KIT ASSEMBLY HYUNDAI GENESIS COUPE 2010 ISO DIN HEAD UNIT PROVISION 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2 Attach the ISO brackets to the aftermarket radio (figure A), then secure the assembly to the pocket using the (4) supplied Phillips screws (figure B). 3 Mount the assembly into the sub dash. 4 Reassemble dash in reverse order of disassembly using the 99-7339 trim panel instead of the factory trim panel. A В 3 99-7339 INSTRUCTIONS METRA. THE WORLD’S BEST KITS.™ Q 1-800-221-0932 Q REV. 12/15/09 ©COPYRIGHT 2003-2010 METRA ELECTRONICS CORPORATION INST99-7339...
Эта инструкция также подходит к моделям:Плиты - 99-7339B (409.36 kb)