Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Some canners are designed with smaller bases for use on smoothtop surfaces. When canning, use the High heat setting only until the water comes to a boil or pressure is reached in the canner. Reduce to the lowest heat setting that maintains the boil or pressure. If the heat is not turned down, the cooktop may be damaged. 6 Oven Cooking Control Panel A B C D E F G H I J The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions. Control panel shown includes model specific features. (Styling may vary depending on model.) A B C D E F G H I J Broil Use for broiling and top browning. Bake Use for baking and roasting. More(^) or Enters or changes time, oven Less (Ў) temperature. Sets HI or LO broil. Timer Sets Timer. Cook & Hold Bakes for a preset time, then holds food warm for 1 hour. Clean Use to set self-clean cycle. Favorite Use to set and save a specific Cook & Hold procedure. Clock Use to set time-of-day clock. Keep Warm Use to keep cooked food warm in oven. Cancel Cancels all operations except Timer and Clock. Clock The clock can be set to display time in a 12-hour or 24-hour format. The clock is set at the factory for the 12-hour format. To change the clock to 24-hour format: 1. Press and hold the Cancel and Favorite pads for three seconds. 2. Press ^ or Ў pad to select 12 or 24 hour. 3. Set the time of day following the directions below. To set the Clock: 1. Press the Clock pad. • The colon flashes in the display. 2. Press ^ or Ў pad to set the time of day. • Colon continues flashing. 3. Press the Clock pad again or wait four Using the Touchpads • Press the desired pad. • Press ^ or Ў to enter time or temperature. • A beep will sound when any pad is touched. • A double beep will sound if a programming error occurs. Note: Four seconds after pressing the ^ or Ў pad, the time or temperature will automatically be entered. If more than 30 seconds elapse between touching a function pad and the ^ or Ў pad, the function will be canceled and the display will return to the previous display. seconds. The colon stops flashing. When electrical power is supplied or after a power interruption, the last clock time before power was interrupted will flash. To recall the time of day when another time function is showing, press the Clock pad. Clock time cannot be changed when the oven has been programmed for Delay Cook or Clean, or Cook & Hold. 7 Oven Cooking To cancel the Clock display: If you do not want the time of day to display: Press and hold the Cancel and Clock pads for three seconds. The time of day will disappear from the display When the clock display is canceled, press the Clock pad to briefly display the time of day. To restore the Clock display: Press and hold the Cancel and Clock pads for three seconds. The time of day will reappear in the display. Timer The timer can be set from one minute (0:01) up to 99 hours and 59 minutes (99:59). The timer can be used independently of any other oven activity. It can also be set while another oven function is operating. The timer does not control the oven. It only controls a beeper. To set the Timer: 1. Press the Timer pad. • 0:00 lights in the display. • The colon will flash. 2. Press the ^ or Ў pad until the correct time appears in the display. • The colon will continue to flash. 3. Press Timer pad again or wait four seconds. • The colon continues flashing and the time begins counting down. • The last minute of the timer countdown will be displayed as seconds. 4. At the end of the set time, one long beep will sound. To cancel the Timer: 1. Press and hold the Timer pad for three seconds. OR 2. Press the Timer pad and set the time to 0:00. Locking the Control The touchpad controls and can be locked for safety, cleaning, or to prevent unwanted use. They will not function when locked. If the oven is currently in use, the controls cannot be locked. The current time of day will remain in the display when the controls are locked. To lock: Press and hold the Cancel and Cook & Hold pads for three seconds. (Press the Cancel pad first.) To unlock: Press and hold the Cancel and Cook & Hold pads for three seconds. (Press the Cancel pad first.) Fault Codes BAKE or LOCK may flash rapidly in the display to alert you if there is an error or a problem. If BAKE or LOCK flash in the display, press Cancel pad. If BAKE or LOCK continue to flash, disconnect power to the appliance. Wait a few minutes, and then reconnect power. If the flashing still continues, disconnect power to the appliance and call an authorized servicer. 8 Oven Cooking Baking To set Bake: 1. Press the Bake pad. • BAKE will flash. • 000 will light in the display. 2. Select the oven temperature. The oven temperature can be set from 170° to 550°. Press or press and hold the ^ or Ў pad. • 350° will light when either pad is first pressed. • Press the ^ pad to increase the temperature. • Press the Ў pad to decrease the temperature. 3. Press Bake pad again ...