Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Copyright ©1999 CANON INC. ALL RIGHTS RESERVED. Using the Printer Safely Read and follow all of these cautions and warnings to ensure the safe use of the printer. To avoid the hazards of fire, personal injury, or damage to the printer, never attempt to use the printer in any way other than the methods described in this guide. Warning Choosing a location Never place the printer near flammable solvents such as alcohol, thinner, etc. To avoid the hazards of fire or electric shock, keep all flammable liquids away from the printer. Power supply Never attempt to plug the power cord into a power outlet when your hands are wet. To avoid electric shock, make sure that your hands are dry. Always push the plug completely into the power outlet. A loose or poorly connected plug could cause a fire or electric shock. Never cut, modify, stretch, bend, or twist the power cord, and never place heavy objects on the power cord. A power leak from a damaged power cord could cause a fire or electric shock. Never plug the printer power cord into a power outlet (power board, double adapter, etc.) that is shared by other devices or office equipment. To prevent the hazards of fire or electric shock, avoid overloading power points. Never use the printer if the power cord is bundled or knotted. To prevent the hazards of fire or electric shock, make sure the power cord is straight. If you detect smoke, unusual odours, or strange noises around the printer, immediately press the POWER button to switch the printer off and disconnect the power plug. To avoid fire or electric shock, never use the printer under these conditions. Call for service. About your guides CautionWarning Cleaning the printer Use only a slightly damp cloth to clean the printer. Never use flammable solvents like alcohol, benzene, thinner, etc. If a flammable solvent contacts an electrical component inside the printer, this could cause a fire or electric shock. Always unplug the printer power cord before you clean the printer. If you mistakenly switch the printer on while cleaning it, you could touch moving components inside the printer and suffer injury. Maintaining the printer Never attempt to disassemble or modify the printer. The printer contains high voltage components which could cause a fire or serious electric shock. Choosing a location Never set the printer on a surface that is unstable or subject to excessive vibration. The printer could tip or fall and cause injury. Never use the printer in a location that is subject to high humidity, dust, high temperatures, or direct sunlight. Set up and use the printer in a location where ambient temperature is within 5°C~35°C (41°F~95°F) and 10%~90% humidity with no condensation. Never place the printer on a thick carpet or rug. Fibres or dust entering the printer could cause a fire. Working around the printer Never use flammable sprays near the printer. Gases in the spray could cause a fire or electric shock if they come in cont...
Эта инструкция также подходит к моделям:Принтеры - 8200 (4.55 mb)