Войти:
Оценок - 4, средний балл: 4.5 ( )

Инструкция по эксплуатации Arcam, модель 9

Производитель: Arcam
Размер: 840.8 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


To delete a track from the middle of a programmed selection press 'CHECK' until you get to the track you wish to delete. Then press 'CLEAR'. To delete all the programmed tracks press the 'STOP' key twice or continually press 'CLEAR' until '0' is displayed. 0-9 KEYPAD Allows direct access to individual tracks on the disc. To select a track, press the corresponding keypad button then press 'PLAY'. For tracks greater than 9 just enter the appropriate numbers, ie for track 15 press I, then 5, then'PLAY'. REMAIN Press once to display the remaining time of the track Press a second time to display the remaining time of the disc. Press 'REMAIN' a third time and the display will revert to its original setting showing the elapsed time of the track If you press 'REMAIN' when the disc is not playing the total number of tracks and total playing time is displayed. MUTE Stops sound to the speaker outputs of certain Arcam amplifiers. Please note: I he 'VOLUME' control and 'MUTE' buttons have no effect on the audio output level of the Alpha CD players. SPACE This button automatically inserts a4 second space between tracks in either normal.or programmed play (see PROG). This enables the music search system of certain cassette decks to operate correctly when making recordings. The 'SPACE' indicator on the display is illuminated. Press the SPACE button a second time to cancel this function. The 4 second space is ignored when you use any of the search keys. NOTE:The 4 second time between tracks is added to the remaining and total time display for the disc e.g. an I I track disc will have 40 seconds added to its total track time when using the 'SPACE' function. When the CD is between tracks the displayed time will count from -0.04 to 0.00 in one second increments and the 'SPACE' legend will flash,before the track begins to play. VOLUME + - Adjusts the volume level on Arcam remote controllable amplifiers. Please note:The 'VOLUME' control and 'MUTE' buttons have no effect on the audio output level of the Alpha CD players. A-B This button enables you to repeat any section of music within one track. Whilst the disc is playing press the 'A-B' button at --the start of the section that you wish to repeat. 'REPEAT is illuminated on the display and the 'A -' letter flashes. Press the A-B button a second time when you reach the end of the section you wish to repeat The 'A-B' letters stop flashing and remain lit. The selected section of track will play repeatedly until you press the ‘STOP’ or H or H ■ The backward -mm and forward ►► search buttons can move back or forward within the selected section. SHUFFLE Press 'SHUFFLE' and then 'PLAY' to play all the tracks on the disc in random order. Press 'SHUFFLE' during play and shuffle play will begin from the current selection. 'SHUFFLE' will illuminate in the display. While the player is deciding which track to play the track indicator on the display will perform a scrolling routine. In 'SHUFFLE' mode the H button will only replay the current track, and not select the previous track. To stop the shuffle function press 'SHUFFLE' a second time. SCAN Press to play the first 10 seconds of each track in sequence. The track number will be indicated on the display while 'SCAN' is selected. To continue listening to a 'scanned' track, press ‘PLAY’. The player will leave the 'SCAN' mode once ‘PLAY’ has been pressed. Technical notes 1 Alpha 7, 8, 8SE & 9 CD Players These all use the same basic chassis and mechanics and the controls are identical, They differ in the system of digital to analogue (D/A) conversion used in each player Lower specification Arcam CD players can be upgraded by your dealer to higher performance models by installing the appropriate Arcam D/A upgrade kit. Alpha 7 CD Player This has Delta-Sigma D/A conversion. Alpha 8 CD Player This benefits from Bitstream Pulse Width Modulation D/A converters incorporating 20 bit digital filtering. Alpha 8SE CD Player The DAC module of the 8SE utilises the Pacific microsonics PMD 100 filter and HDCD® (High Definition Compatible Digital) decoder, coupled to the high quality PWM (Pulse width modulated) bitstream DAC (digital to analogue convertor) used in the Alpha 8CD player:The benefits of this is improved sound quality on all conventional CDs plus the ability to reproduce the full dynamic range of the ever increasing number of HDCD encoded CDs now available. Alpha 9 CD Player The Alpha 9 CD incorporates the unique cCS Ring DAC ' which delivers state-of-the-art performance from its revolutionary 24 bit technology, This new DAC is the result of a three year partnership between two British companies - Arcam and cCS (Data Conversion Systems Ltd), the world’s leading supplier of professional audio ADCs and DACs. Ring DAC technology exhibits exceptionally linear response when decoding digital audio data, with the ability to resolve the finest acoustic details recorded on a compact disc. In the Alpha 9 CD player, 24 bit d...

Эта инструкция также подходит к моделям:
Плееры - 8 (840.8 kb)
Плееры - 7 (840.8 kb)
Плееры - 8SE (840.8 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории