Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
• To prevent damage to the disc, never open the CD door while the disc is rotating. Wait for the disc to stop before opening the CD door. Never touch the lens when the CD compartment door is open. • DO NOT use the carrying handle when playing a CD. The CD should only be used on a steady surface. 7 MP3112.OM.QXD 6/25/02 11:53 AM Page 8 COMPACT DISC (CD) OPERATION (CONTINUED) TO REPEATEDLY PLAY BACK ONE TRACK 1 31 2 2 1 23 Slide the Function switch to the CD position and insert a CD as described in the TO INSERT A CD section on page 6. Select a track using the Skip/Search ( ) . or ( ) . button and press the PLAY/ PAUSE (./ ) button .. Press the REPEAT button . once, the REPEAT indicator will blink and the unit will play the selected track over and over until the STOP ( ) button . is pressed. TO REPEATEDLY PLAY BACK ALL TRACKS 1 1 2 32 Slide the Function switch to the CD position and insert a CD as described in the TO INSERT A CD section on page 6. Press the PLAY/PAUSE button . to begin playback and the unit will play the entire disc over and over until the STOP () button . is pressed. Press the REPEAT button twice, the REPEAT indicator will light. NOTE: To stop and cancel Repeat playback, press the STOP () button. 8 2 2 MP3112.OM.QXD 6/25/02 11:53 AM Page 9 COMPACT DISC (CD) OPERATION (CONTINUED) TO PROGRAM THE MEMORY (UP TO 19 TRACKS) Slide the Function switch to the CD position; the POWER ON indicator will light. Insert a CD as described in the TO INSERT A CD section on page 6. 1 2 1 3 Use the Skip/Search ( ) . or ( ) . button to select the first track to be programmed. Press the PROGRAM button, the PROGRAM indicator will blink. 4 2 1 5 Repeat steps 3 and 4 to program the other desired tracks in sequence (up to 19 tracks). 6 Press the PLAY/ PAUSE ( ) button to begin playback; the Program indicator will blink and the tracks will play in the order programmed. Press the PROGRAM button again; the selected track has now been programmed and counted as program 1. NOTES • Programming is the ability to preselect the order in which a series of tracks will be played. • Each track may be stored in the program memory as many times as desired (up to 19 tracks). • As each track is played, its track number will be displayed. You can move forward or backward through the programmed tracks with the Skip/Search or button. • The CD player will stop after all programmed tracks have been played or the STOP () button is pressed. • When 19 tracks have been programmed, the CD memory is full (“- -” will appear in the display). • To cancel program playback, press the STOP () button while in the stop mode, or open the CD Door. • To check the program, press the PROGRAM button once more; the display will show the track numbers in the order they were programmed. 9 MP3112.OM.QXD 6/25/02 11:53 AM Page 10 CARE AND MAINTENANCE Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc. to the compact disc label. • Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the compact disc. If necessary, use a CD cleaning kit. • If a disc skips or gets stuck on a section of the compact disc, it is probably dirty or damaged (scratched). • When cleaning the compact disc, wipe in straight lines from the center of the compact disc to the outer edge of the compact disc. Never wipe in circular motions. BENZENE CLEANER COMPACT • This unit is designed to play only compact discs bearing the identification logo as shown here. Other discs may not conform to the CD standard and may not play properly. DIGITAL AUDIO • Compact discs should be stored in their cases after each use to avoid damage. • Do not expose compact discs to direct sunlight, high humidity, high temperatures, or dust, etc. Prolonged exposure or extreme temperatures can warp the compact disc. • Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the ink may damage the surface. Cleaning the unit • To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. • The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts. • Mild soap and a damp cloth may be used on the front panel. 10 MP3112.OM.QXD 6/25/02 11:53 AM Page 11 TROUBLESHOOTING GUIDE Should this unit exhibit a problem, check the following before seeking service: Symptom Possible Cause Solution Radio Noise or sound distorted Station not tuned properly for Retune the AM or FM broadcast on radio broadcasts. AM or FM. station. FM: Antenna is not properly Reorient FM Antenna. adjusted. AM: Unit is not positioned Rotate unit until best correctly. reception is obtained. FM station not heard Poor FM signal being received or Retune stati...