Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
PAUSE Control To pause momentarily during CD playback press the button again. The sound stops and the elapsed time display flashes but the disc continues to spin. Press the button once more to cancel Pause mode and resume playback. The elapsed time display stops flashing. 22 PD3686_021705r.p65 22 17/2/2005, 16:14 SKIP/SEARCH ( / ) Controls To skip to higher or lower numbered tracks during playback repeatedly press the or button until the desired track number appears in the display. Playback will begin on the desired track. To perform high speed search within a track to locate a specific musical passage depress and hold the or button. The player will move rapidly forward or backward as long as the buttons are depressed. When you hear the desired passage release the buttons and normal playback will resume at that point. To Start Playback On A Specific Track Load the disc as usual and wait until the total playing time and track numbers appear on the display. Press the or button until the desired track number appears in the display, then press the button to begin playback on that track. 23 PD3686_021705r.p65 23 17/2/2005, 16:14 REPEAT Playback You can program the player to continuously repeat a single track or the entire disc. The Repeat function can be activated while a disc is playing or while the disc is stopped. One Track Repeat Press the or button until the desired track number appears in the display, then press the REPEAT button once. The indicator flashes in the display. Press the button to begin playback on that track. The selected track will be repeated continuously. All Tracks Repeat Load the disc as usual and wait until the total playing time and track numbers appear on the display. Press the REPEAT button twice. The indicator remains ‘On’. Press the button to begin playback. The entire disc will be repeated continuously.. To cancel Repeat Playback continue pressing the REPEAT button until the indicator disappears. Repeat is also canceled by pressing the STOP/BAND button or selecting the Tuner, Aux, or Standby modes. 24 PD3686_021705r.p65 24 17/2/2005, 16:14 INTRO Scan Playback This feature allows you to play just the first 10 seconds of each track on the disc. This may be useful when you are trying to locate a specific song but you do not remember the title. Load the disc as usual and wait until the display shows the total playing time and number of tracks. Press the INTRO/ST. button. The INTRO indicator will appear in the display. The player will play the first 10 seconds of each track automatically. When the first 10 seconds of the last track has played the player stops and the display again shows the total playing time and number of tracks on the disc. To cancel the Intro mode press the INTRO/ST. button once more until the INTRO indicator disappears. Intro mode can also be canceled by pressing the STOP/BAND button. RANDOM Playback This feature allows you to play all the tracks on a disc in random order. Load the disc as usual and wait until the display shows the total playing time and number of tracks. Press the RANDOM button. The indicator appears in the display. The tracks will be played in random order. After all tracks have played the player stops and the display again shows the total playing time and number of tracks. To cancel the Random mode press the RANDOM button until the indicator disappears. Random mode can also be canceled by pressing the STOP/BAND button. 25 PD3686_021705r.p65 25 17/2/2005, 16:14 Programmed Playback You can program up to 32 tracks on a disc to playback in any desired order. You may also program a specific track to play several times within the same program. Note: The player cannot be programmed while a disc is playing. If a disc is playing press the STOP/BAND button to stop playback before you begin the programming steps below. 1.) Press the FUNCTION button to select CD, insert your disc in the player, close the door, and wait until the total track number appears in the display. 2.) Press the PRG. button once. The Indicator,, program memory “P-01”, and Track number “00” appear in the display. 3.) Use the or button to select the first track to be programmed. Example: Track “08”. 4.) When track number “08” appears in the display, press the PRG. button once again to enter the track “08”in program memory number “01”. The track number returns to “00”and the program memory advances to “P-02” indicating that you may now select a track to be entered in program memory number “02”. 5.) Use the or button to select the next track to be programmed. When the desired track number appears in the display press the PRG. button again to enter that track in the program memory. 6.) Repeat Step 5 until you have entered up to 32 tracks in the program memory. 26 PD3686_021705r.p65 26 17/2/2005, 16:14 7.) To begin programmed playback press the button. The display will show the first programmed track and playback will begin on that track. The Indicator remains in the display. After the last ...