Touching or wiping the surface will damage it permanently. • The lens is made of optical-quality, tempered glass. As with all glass, avoid dropping or sharp impact on spotlight. • Do not allow the hot lens to come in contact with water or materials subject to heat damage. • This spotlight is weather resistant. It is not waterproof. Do not use the spotlight under water or store outdoors. • Only use a Brinkmann 12-volt, halogen bulb that is designed for your Q-Beam spotlight. Use of any other bulb

Make sure the reflector does not touch or bend the bulb while replacing spotlight head. Step 1: Disconnect spotlight from charger. Step 2: Remove front rubber cap from barrel of spotlight. Step 3: Pinch the wings of the glass retainer together and lift as illustrated. Glass& ReflectorRearHousing Glass Rubber Retainer Cap Step 4: Pull glass and reflector away from rear housing. Step 5: Pull old bulb straight out of bulb holder. Step 6: Make certain that "legs" on new bulb are straight. Insert "le

OWNER’S MANUAL & OPERATING INSTRUCTIONS IMPORTANT SAFETY WARNINGS READ AND FOLLOW ALL SAFETY WARNINGS AND INSTRUCTIONS IN THE OWNER’S MANUAL BEFORE OPERATING SPOTLIGHT. WARNING • • • • • • • • • Never place spotlight lens (face) down when light is on or if it was recently on. Doing so could burn/ignite surfaces such as seats, carpeting, etc. and cause serious property damage. Always turn spotlight OFF and unplug from source when not in use. To prevent serious damage to eyesight, never look into

• Never place spotlight face down when light is on. Doing so could burn/ignite surfaces such as seats, carpeting, etc. and cause serious property damage. Always turn spotlight off when not in use. • To prevent serious damage to eyesight, never look into spotlight when light is on. Do not shine light into the face of someone else. • Do not touch lens of spotlight when light is on or if it was recently on. The lens will be hot and could cause serious burns. • Do not place spotlight in water. Keep