Оценок - 2, средний балл: 3.5 ( )

Производитель: Husqvarna Размер: 1.45 mb Название файла: Язык инструкции:

See Battery – Gasoline Vehicles on page 39. Front wheel alignment and camber Check and adjust if necessary. See Section 7 – Steering and Front Suspension in the appropriate maintenance and service manual. Electrical wiring and connections Check for tightness and damage. Brake system Check brake shoes; replace if necessary. Lubricate brake slides. See Periodic Lubrication Schedules on page 32. Check brake cables for damage; replace if necessary. Annual service by trained technician only (or every 100 hours of operation, whichever comes first) Engine Check for leaks around gaskets, fill plugs, etc. Inspect, clean and regap spark plug; replace if necessary. Engine air intake system Check air filter element; clean or replace if necessary. Check clamps for tightness; check hose for cracks. General vehicle Check for loose hardware and tighten if necessary. Two year service by trained technician only (or every 200 hours of operation, whichever comes first) Fuel filters Replace. Dispose of used filters properly. y WARNING • If any problems are found during scheduled inspection or service, do not operate the vehicle until repairs are made. Failure to make necessary repairs could result in fire, property damage, severe personal injury, or death. 2006 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual Page 31 Periodic Lubrication Schedules PERIODIC LUBRICATION SCHEDULES PERIODIC LUBRICATION SCHEDULE – ELECTRIC VEHICLES REGULAR INTERVAL SERVICE LUBRICATION POINTS RECOMMENDED LUBRICANT Semiannually by owner or trained technician (or every 50 hours of operation, whichever comes first) Brake pedal shaft bearings 1 Dry Moly Lube (Husqvarna 603 00 0001) Brake linkage and pivots 2 Dry Moly Lube (Husqvarna 603 00 0001) Accelerator pivot rod supports 3 Dry Moly Lube (Husqvarna 603 00 0001) Charger receptacle 4 WD-40 Brake slides 5 Dry Moly Lube (Husqvarna 603 00 0001) Front suspension (5 fittings) 6 Chassis Lube – EP NLGI Grade 2 Annually by trained technician only (or every 100 hours of operation, whichever comes first) Check/fill transaxle to plug level 7 22 oz. (0.67 L) SAE 30 WT. API Class SE, SF, or SG Oil (or higher) FLOORBOARD 6 66 1 3 2 6 62 3 1 4 5 7 5 Figure 19 Lubrication Points – Electric Vehicles Page 32 2006 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual Periodic Lubrication Schedules PERIODIC LUBRICATION SCHEDULE – GASOLINE VEHICLES REGULAR INTERVAL SERVICE LUBRICATION POINTS RECOMMENDED LUBRICANT Semiannually by owneror trained technician (or every 50 hours of operation, whichever comes first) Brake pedal shaft bearings 1 Dry Moly Lube (Husqvarna 603 00 0001) Brake linkage and pivots 2 Dry Moly Lube (Husqvarna 603 00 0001) Accelerator push rod pivots, mounts, and shifter cable pivots 3 Dry Moly Lube (Husqvarna 603 00 0001) Front suspension (5 fittings) 4 Chassis Lube (EP NLGI Grade 2) Brake slides 5 Dry Moly Lube (Husqvarna 603 00 0001) Annually by trained technician only (or every 100 hours of operation, whichever comes first) Check/fill unitized transaxle to plug level 6 27 oz. (0.8 L) 80-90 WT. API Class GL-3 or 80-90 WT. AGMA Class EP Gear Lube First change 100 hours – additional change every 200 hours of operation, or annually, whichever comes first. Change engine oil and oil filter 7 22 oz. (0.67 L) without filter; 38 oz. (1.12 L) with filter 7 33 4 3 4 2 2 1 1 4 44 3 6 3 5 5 Figure 20 Lubrication Points – Gasoline Vehicles 2006 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual Page 33 Vehicle Controller – Electric Vehicles VEHICLE CONTROLLER – ELECTRIC VEHICLES The electric vehicle is equipped with a solid state speed controller. In order to properly service and maintain the solid state controller vehicle, it is necessary to understand the electrical circuitry and the functions of all components in both systems. Therefore, if any repair or servicing needs to be performed, we recommend that it be performed by an authorized Husqvarna distributor/dealer using Husqvarna parts. BATTERIES – ELECTRIC VEHICLES See General Warnings on page 9. y DANGER • Battery – Explosive gases! Do not smoke. Keep sparks and flames away from the vehicle and service area. Ventilate when charging or operating vehicle in an enclosed area. Wear a full face shield and rubber gloves when working on or near batteries. • Charge batteries in a well-ventilated area only. Batteries emit hydrogen while being charged. Hydrogen is an explosive gas and must never exceed a level of 2% of the air. • Battery – Poison! Contains acid! Causes severe burns. Avoid contact with skin, eyes, or clothing. Antidotes: -External: Flush with water. Call a physician immediately. -Internal: Drink large quantities of milk or water followed with milk of magnesia or vegetable oil. Call a physician immediately. -Eyes: Flush with water for 15 minutes. Call a physician immediately. y WARNING • Wear safety glasses or approved eye protection when servicing the vehicle or battery charger. Wear a full face shield and rubber glo...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: