Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential install

LIMITATION OF LIABILITY. IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE TO YOU FOR ANY DAMAGES, CLAIMS OR COSTS WHATSOEVER OR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL DAMAGES, OR ANY LOST PROFITS OR LOST SAVINGS, EVEN IF AN HP REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS, DAMAGES, CLAIMS OR COSTS OR FOR ANY CLAIM BY ANY THIRD PARTY. THE FOREGOING LIMITATIONS AND EXCLUSIONS APPLY TO THE EXTENT PERMITTED BY APPLICABLE LAW IN YOUR JURISDICTION. HP’S AGGREGATE LIABILITY AND THAT OF

Thank you for choosing Compaq! Please help us provide quality support information by completing and returning this postage-paid questionnaire. 1. Were you able to set up the computer using the setup poster? o Yes o No If not, at what point did you begin to have difficulty? 2. Was the online Reference Guide easy to find? o Yes o No Is it easy to use? o Yes o No If not, why? 3. What computer task(s) will you need the most help with? 4. If you need help with a computer task, where will you get it?

Compaq Computer Corporation assumes no responsibility for any errors that might appear in this document. The software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license. No responsibility is assumed for the use or reliability of software or equipment that is not supplied by Compaq Computer Corporation or its affiliated companies. Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to

No part of this reference guide may be photocopied or reproduced in any form without prior written consent from Compaq Computer Corporation. © 1999 Compaq Computer Corporation. All rights reserved. COMPAQ, AERO and the Compaq logo are registered in the U.S. Patent and Trademark Office. Microsoft, MS, ActiveSync, Active Desktop, Outlook, Windows, Windows NT, and the Windows CE logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Hewlett-Packard® Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HP shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN AD

Installing Software from a CD, DVD, or Diskette The installation process begins automatically when you insert the CD or DVD into the disc drive. If the installation process does not begin automatically, refer to the documentation that came with the software. If no documentation exists, follow the procedure listed here to install software from a CD, DVD, or diskette. 1. Close all open programs. 2. On the Windows desktop, click Start then click Control Panel. 3. Double-click the Add or Remove Prog

sOÎv/Ri: © 2001 Compaq Computer Corporation. COMPAQ, the Compaq logo, and Presario Registered U.S. Patent and Trademark Office. Second Edition July 2001. Connectors and their locations may vary by model. Please match the correct colored plug to coordinating port. * Powered speakers are required. er~-^ d Voltage ’"Voltage is preset to the correct rating. If in doubt, contact your local Power Utility. ♦ / ♦ Registration / ♦ /

Install the four guide screws (two on each side) that you removed from the old drive into the new drive. The screws help guide the drive into its proper position in the bay. 2. Slide the drive into the drive bay 1, making sure to align the guide screws with the guide slots, until it snaps into place. Sliding the Drive into the Drive Cage 3. Reconnect the power and data cables to your drive as indicated in the following illustrations. Hardware Reference Guide 3–9 Computer Upgrades Reconnecting th

Las ilustraciones pueden diferir ligeramente con respecto a su PC Presario Internet. El codigo de colores le permitira hacer coincidir los conectores con los puertos correspondientes. REMARQUES : En fonction du modele, l’ordinateur Presario Internet PC est fourni avec une souris sans fil avec roulette de defilement ou une souris standard avec roulette de defilement. Le recepteur de la souris sans fil et le connecteur de la souris standard se branchent sur le port PS2, comme l’illustre l’etape 2