Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Doing so could cause the drive to malfunction. Manual eject hole (available on certain models)—Use if you need to release the disc tray (in a tray-type drive) when the power is off. Use a straightened paper clip or other narrow object to press the manual eject button located inside the hole. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. Inserting an optical disc 1 Make sure the computer is turned on and the drive’s in-use indicator light is off. 2 If you have a tray-type drive, press the drive’s eject button to eject the disc tray. After the tray slides partially out of the drive, grasp the tray and pull it fully open. 3 Hold the disc by its edges and check that it is clean and free of dust. Handle DVDs and CDs carefully, making contact only with the center hole and edge. Do not touch the surface of the disc. Do not stack discs. If you incorrectly handle the discs, you could lose data. 4 Insert the disk into the drive according to the instructions below for your drive type. . Tray-type drive: With the label facing up, gently press the disc onto the center spindle until it clicks into place. Make sure the disc is completely on the spindle and is lying flat on the tray. Then, push the disc tray in by pressing gently on the center of the tray until it clicks into place. (Sample Illustration) Positioning the disc in a tray-type drive Using the optical disc drive Using the optical disc drive If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. . Slot-type drive: With the label facing up, carefully place the disc partially into the slot until the disc stops or the drive starts pulling the disc in. (Sample Illustration) Positioning the disc in a slot-type drive Use only standard (12 cm) CD or DVD Discs. Any other size or shape disc cannot be removed from this slot and may damage the system. Removing an optical disc If your optical disc drive has a manual eject button, you can remove a disc while the computer is off if necessary (for example, if you cannot turn on the computer because the battery is completely discharged). See “Using the manual eject button” on page 24. Otherwise, the computer must be powered on to eject a disc (follow the procedure below). To remove an optical disc with the computer turned on: 1 Press the eject button on the drive. Do not press the eject button while the drive in-use indicator light is glowing. Doing so could damage the disc or the drive. Also, if the disc is still spinning when you open the disc tray (on a tray-type drive), wait for it to stop spinning before you remove it. 2 Remove the disc from the drive, as indicated below for your drive type: . Tray-type drives: Pull the tray out fully, remove the disc, and then gently press the tray in to close it. . Slot-type drives: Grasp the disc and remove it from the slot. 3 Place the disc in its protective cover. Using the Web Camera Using the Web Camera (Available on certain models.) To remove an optical disc with the computer turned off: 1 Insert a slender object, such as a straightened paper clip, into the manual eject hole. The disc tray or disc slides partially out of the drive. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. 2 Remove the disc from the drive. Using the Web Camera (Available on certain models.) Your computer may come with a built-in Web Camera. With this Web Camera you can take pictures and record videos with your computer, chat with others and have them see you while using instant messaging (IM) programs, and have video conference calls. To email, instant message, or video conference you must be connected to the Internet. Depending on your computer model, the process of sending email, taking pictures or recording video messages may vary. The Web Camera software, by default, should already be running. The Web Camera indicator light glows when the Web Camera is active. For more information on the software, click Start, All Programs, TOSHIBA, Utilities, and then Web Camera Application Help. Using the Memory card reader (Available on certain models.) The Memory card reader supports the use of Secure Digital™ (SD™) or MultiMediaCard® (MMC®) media. These media can be used with a variety of digital products: digital music players, cellular phones, PDAs, digital cameras, digital video camcorders, etc. To use a micro or mini SD™ Card, an SD™ adapter is required. Using the Memory card reader Using the Memory card reader Do not use the Copy Disk function for this type of media. To copy data from one media to another, use the drag-and-drop feature of the Windows® operating system. Inserting memory media The following instructions apply to all types of supported media devices. 1 Turn the media so that the contacts (metal areas) are face down. 2 Push the media into the adapter until it locks in place. (Sample Illustration) Inserting me...
Эта инструкция также подходит к моделям:Ноутбуки - R845-S85 (897.46 kb)
Ноутбуки - R845-S95 (897.46 kb)
Ноутбуки - R845-ST5N01 (897.46 kb)
Ноутбуки - R845-ST6N01 (897.46 kb)