Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
DO NOT OPEN CAUTION: to reduce the risk of electric shock, do not REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. LOCATION OF CONTROLS: 1. TV TUNING 2. TV/RADIO SWITCH 3. BAND SWITCH 4. VOLUME CONTROL 5. RADIO TUNING 6. EXT ANT JACK 7. EARPHONE POWER SUPPLY: A: BATTERY: 1. Open the battery holder and insert 10 "C" batteries.(Not included) 2. Close the holder battery cabinet. ATTENTION: When using the AC adaptor, after plugging in, the internal battery supply will be cut off automatically. 8. DC JACK 9. VIDEO IN 10. AUDIO IN 11. V-HOLD 12. CONTRAST 13. BRIGHT 14. ANTENNA 1 B: AC ADAPTOR Insert one end of AC adaptor into household AC wall outlet and insert the other end into DC jack. ATTENTION: To use the adaptor, plug the small end of the adaptor into the DC jack 8, then plug the pronged plug into AC wall outlet. WARNING: Before plugging into AC wall outlet, make sure the outside adaptor voltage is the same voltage as used in your location. Using other adaptor with wrong specification may damage your set C: 12V CAR/BOAT ADAPTOR OPERATION (included) Plug the torpedo-shape end of the adaptor into the cigar socket in your car/boat, make sure to push it all the way in. Now plug the small end of the adaptor into the DC jack 8. The set will now operate on the current of your car/boat power source. REMARK: CAR/BOAT adaptor only operate with a negative ground battery system in your car/boat. D: ROD ANTENNA In a normal reception area the built in rod antenna will deliver a sharp clear picture and the best sound when extended. Adjust its length, direction and angle for the clearest picture and best sound. E: EXTERNAL ANTENNA ADAPTOR In areas where reception is weak or affected by local interference, an external antenna should be used to improve reception. OPERATING INSTRUCTIONS TV Program Section Push the switch 2 to "TV" position Set the band switch 3 to either VHF or UHF position. VL: set the VHF low channels 2 VH: set the VHF high channels UHF: set the UHF all channels Turn the tuning control until desired band channel appears. Volume control 4 for both TV & RADIO Set the desired volume level. V-Hold control 11 When the picture is overlapping or it moves up or down, turn the vertical Hold in either direction until the picture is stabilized. Brightness Control 13 When the picture is too bright or too dark turn the control until satisfactory brightness is obtained. Contrast control 12 When the picture is too bright or too strong, turn the contrast in either direction until optimum contrast is obtained. RADIO PROGRAM SECTION Set switch 2 to RADIO position Set function switch 3 to either AM or FM position. Turn the tuning control until desired broadcasting station is obtained. CONNECTING AN AUDIO/VIDEO SOURCE You can use your TV/RADIO to monitor an audio/video source (such as a VCD, camcorder or video cassette player). Connect the audio/video source's output jacks to the AUDIO INPUT and VIDEO INPUT jacks on the back of the TV/RADIO. 3 5.5 INCH NOIR & BLANC TV AVEC AM/FM RADIO RT068J MANUEL A CAUTION RISK OF EIECTRIC A SHOCK. DO NOT OPEN CAUTION: to reduce the risk of electric shock, do not REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS LNSIDE. RFER SERVICING TO QUALIFIED PERSONNEL. 4 8 Ficne Electricité 9 Entrée Viodéo 10 Entrée Audio 11 S'abilisateurHorizontale(V-Hoid) 12 Contraste 13 Luminosité 14 Antenne A- COURANT PILES Découvrir le boitier a Piles Mettre 10 Piles "C" Refermer 1 Bouton Setection Bandes (TV ou RADIO) 2 Bouton TV/Radio 3 Selection Chaines TV/Radio 4 Volume 5 Sélecteur Chaine Radio 6 Fiche pour Antenne Extérieure 7 Fiche Ecouteurs ATTENTION: : Quand vous utilisez I'adapteur AC, après avoir branché, l'offre interne de batterie sera découpée automatiquement. B- ADAPTEUR SECTEIR ATT...