Оценок - 4, средний балл: 5 ( )

Производитель: Toshiba Размер: 3.66 mb Название файла: Язык инструкции:

Toshiba Wireless Projector. Switches the Wireless LAN connection to connect to a Toshiba Wireless Projector . Direct Link Toshiba Device. Launches ConfigFree® SUMMIT Toshiba Wireless Projector The Quick Connect feature switches the Wireless LAN connection to connect to a Toshiba Wireless Projector. Once the projector utility is installed, launching the Quick Connect utility automatically opens the Wireless Data Projector Application. There you can configure how you would like to use the projector. To connect to a Toshiba Wireless Projector: 1 Click the icon in the system tray. 2 Use the pointing device to select the Toshiba Wireless Projector (DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad Hoc. If you are connected to an access point, the connection is broken and re-established later. To review the current Toshiba Wireless Projector settings and change them if necessary: 1 Click the icon in the system tray. 2 Use the pointing device to select the Toshiba Wireless Projector (DPJ), then click Settings. The Quick Connect properties dialog box appears. 3 Complete the settings. Refer to the online Help if necessary. 4 Click OK. NOTE Because the wireless LAN’s default connection setting is for Ad Hoc mode, the Toshiba Wireless Projector will not connect if the projector is set to Infrastructure mode. If this occurs, you can change the wireless LAN’s connection setting to Infrastructure mode to match the settings on the projector. Using ConfigFreeUsing ConfigFree with your Toshiba Computer 212 ConfigFree® Utilities (Sample Image) Projector icon when connected with Quick Connect If the wireless mode for the wireless setting is set for 5 GHz (802.11a), Quick Connect changes this mode to 2.4 GHz (802.11b) and then connects to the projector. The wireless LAN configuration returns to the settings that were last used before the Quick Connect function was started: . If the Toshiba Wireless Projector utility is closed. . If you select Toshiba Wireless Projector (DPJ) from the ConfigFree® tray menu (this disconnects the wireless LAN connection). . If you select a profile from the ConfigFree tray menu or when you disable a wireless device. . If you close ConfigFree. Direct Link Toshiba Device When Access Point is not available, use the Direct Link Toshiba Device feature to connect your computer in Ad Hoc (peer-to-peer) mode and use the Summit feature. To use this feature: 1 Display the ConfigFree® menu. 2 Select the ConfigFree Link option from the Direct Link Toshiba Device submenu. This action switches the computer’s Using ConfigFreeUsing ConfigFree with your Toshiba Computer 213 Using the Automatic Switch wireless network setting to Ad Hoc mode, and launches the SUMMIT feature. (Sample Image) Using the Direct Link Toshiba Device feature Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home. The Auto Switch feature contains options for automatically switching between wired and wireless devices. With these options, the computer automatically switches to a wireless LAN network when the cable of the wired LAN network is removed from the computer. When the cable is reconnected, the connection to the wired LAN is re-established. To use the Automatic Switch feature: 1 Right-click the icon in the system tray. 2 Click Auto Switch. The Auto Switch dialog box appears. 3 Check Enable Wireless when cable disconnect occurs. 4 Click OK. NOTE If your computer is connected to multiple wireless LAN devices, the Auto Switch (SSID) feature is disabled. To enable this feature, only one wireless LAN device can be used. Using ConfigFreeUsing ConfigFree with your Toshiba Computer 214 Semi-Automatic Switch Feature Semi-Automatic Switch Feature The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSID, a notification window appears. You can then click this window to connect using the settings specified in the profile. To use the Semi-Automatic Switch feature: 1 Right-click the icon in the system tray. 2 Click Auto Switch. The Auto Switch dialog box appears. 3 Select the Auto Switch (SSID) tab. 4 Select the profile to be automatically selected when the SSID is detected, then click Add. The profile is moved to the List of target SSIDs and profiles. 5 Repeat the previous step for each additional profile you want to select. 6 Select Automatically switch profiles when connected to this SSID. 7 Check Automatically switch profile when connected to this SSID. 8 Click OK. The computer is now configured to use the Semi-Automatic Switch feature. When the computer connec...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: