Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
. Using the “USB Sleep and Charge function” to charge external devices will take longer than charging the devices with their own chargers. . If an external device is connected to the compatible port when the AC adaptor is not connected to the computer, the battery of the computer will be depleted even when the power of the computer is turned OFF. As such, we recommend that you connect the AC adaptor to the computer when using the “USB Sleep and Charge function.” . External devices connected to the USB bus power (DC 5V) function that interfaces with the power ON/OFF of the computer may always be in an operational state. . When there is a current overflow of the external device connected to the compatible port, USB bus power (DC 5V) supply may be stopped for safety reasons. . When “USB Sleep and Charge function” is set to Enabled, the “USB Wakeup function” does not work for compatible port. In that case, if there is a USB port that does not have the USB Sleep and Charge function-compatible icon ( ), attach the mouse or keyboard to it. The “USB Wakeup function” will now work, but the “USB Sleep and Charge function” will be disabled. 167 USB Sleep and Charge Utility Metal paper clips or hair pins/clips will generate heat if they come into contact with USB ports. Do not allow USB ports to come into contact with metal products, for example when carrying the computer in your bag. Enabling USB Sleep and Charge This utility can be used to enable or disable the USB Sleep and Charge function. To enable this function, select the Enable USB Sleep and Charge check box in the utility. To disable this function, de-select the check box. You can also control whether charging takes place when the computer is running on battery power. To do so, select or de-select the Enable under Battery Mode check box in the utility. If you enable charging when the computer is running on battery power, you can specify that charging stops when battery power drops below a certain level. Use the slider at the bottom of the utility window (beneath the “Lower limit of remaining battery life” heading) to specify when charging should stop. For example, if you set the slider to 10%, charging will stop when 10% or less of the battery power remains. Power supply mode settings Your computer may provide two different charging modes, to support various types of USB devices. If your computer provides more than one charging mode, the charging mode you should select depends on the USB device you want to charge. For example, Typical Mode, which is the default mode, will charge a wide variety of digital audio players. If your device does not charge in Typical Mode, try using Alternate Mode. To select a different charging mode, use the Power supply mode drop-down list in the utility. Utilities Utilities USB Sleep and Charge Utility (Sample Image) TOSHIBA USB Sleep and Charge Utility screen NOTE With certain external devices, the US...
Эта инструкция также подходит к моделям:Ноутбуки - Satellite M640-BT2N22 (3.89 mb)
Ноутбуки - Satellite M640-BT2N23 (3.89 mb)
Ноутбуки - Satellite M640-BT2N25 (3.89 mb)
Ноутбуки - Satellite M640-BT3N25X (3.89 mb)