Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The Windows® operating system has additional power management options that can be accessed through an icon in the Control Panel. For more information, see “TOSHIBA Power Saver” on page 153. What to do when the battery alarm sounds Your computer can be configured to warn you of a low battery charge condition, so you can take the necessary steps to save your work. Your Toshiba computer system offers two alarms before your system shuts down. To change the default alarm settings: 1 Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver. 2 Click the Setup Action tab. 3 Select the Alarm settings in the Setup Alarm section. Mobile Computing Mobile Computing Changing batteries Before your computer runs out of battery power, save your data and take one of the following actions: . Suspend or shut down your computer. . Shut down your computer and replace the main battery with a charged one. . Connect your computer to an AC power source. Changing batteries Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object. This could cause serious injury or fire, and could also damage the battery pack. Never expose a battery pack to abnormal shock, vibration or pressure. The battery pack’s internal protective device could fail, causing it to overheat or ignite, resulting in caustic liquid leakage, or explosion or fire, possibly resulting in death or serious injury. When your main battery has run out of power, you have two options: plug in the AC adapter or install a fresh main battery. TECHNICAL NOTE: To avoid losing any data, save your files and then either completely shut down your computer, or put it into Hibernation mode before changing the main battery. To change the battery: 1 Save your work. 2 Shut down and turn off the computer. 115Mobile Computing Changing batteries 115Mobile Computing Changing batteries Sample battery release lock 6 Press the battery release latch to release the battery. 7 Pull the discharged battery out from the back of the computer. Sample removing the discharged battery Mobile Computing Mobile Computing Changing batteries If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock. Failure to do so could possibly result in serious injury. 8 Wipe the terminals of the charged battery with a clean cloth to ensure a good connection. 9 Insert the charged battery into the slot until the latch clicks. The battery pack has been designed so that you cannot install it with reverse polarity. If the battery does not sli...
Эта инструкция также подходит к моделям:Ноутбуки - Satellite M50-S4182TD (2.69 mb)
Ноутбуки - Satellite M50-S418TD (2.69 mb)
Ноутбуки - Satellite M50-S5181TD (2.69 mb)
Ноутбуки - Satellite M50-S5182TD (2.69 mb)