Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. If Something Goes Wrong If Something Goes Wrong Resolving a hardware conflict Some discs run correctly but others do not. Check the type of disc you are using. The DVD-ROM drive supports the Digital Versatile Disc (DVD) formats DVDROM, DVD-R (read-only), plus CD-ROM, CD-R (readonly), and CD-RW (read-only). If the problem is with a data CD or DVD, refer to the software’s documentation and check that the hardware configuration meets the program’s needs. The disc will not come out of the drive when you click the eject button on the screen. Press the button on the DVD-ROM drive itself. For additional information see “You press the disc eject button, but the drive tray does not slide out.” on page 192. Sound system problems You do not hear any sound from the computer. Adjust the volume control. Try pressing Fn + Esc to see if volume mute is disabled. If you are using external headphones or speakers, check that they are securely connected to your computer. The computer emits a loud, high-pitched noise. This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud. Adjust the volume control. PC Card problems PC Cards (PCMCIA-compatible) include many types of devices, such as a removable hard disk, additional memory, or a pager. Most PC Card problems occur during installation and setup of new cards. If you are having trouble getting one or more of If Something Goes Wrong If Something Goes Wrong Resolving a hardware conflict these devices to work together, several sections in this chapter may apply. Resource conflicts can cause problems when using PC Cards. See “Resolving a hardware conflict” on page 179. Card Information Structure When you insert a PC Card into a slot, the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure (CIS). Sometimes the CIS contains enough information for you to use the card immediately. Other cards must be set up before you can use them. Use the Windows® XP PC Card (PCMCIA) Wizard to set up the card. Refer to your Microsoft® documentation for more information, or refer to the documentation that came with the PC Card. Some card manufacturers use special software called enablers to support their cards. Enablers result in nonstandard configurations that can cause problems when installing the PC Card. If your system does not have built-in drivers for your PC Card and the card did not come with an operating system driver, it may not work under the operating system. Contact the manufacturer of the PC Card for information about using the card under the operating system. PC Card checklist . Make sure the card is inserted properly into the slot. . Make sure all cables are securely connected. . O...
Эта инструкция также подходит к моделям:Ноутбуки - Satellite M50-S4182TD (2.69 mb)
Ноутбуки - Satellite M50-S418TD (2.69 mb)
Ноутбуки - Satellite M50-S5181TD (2.69 mb)
Ноутбуки - Satellite M50-S5182TD (2.69 mb)