Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
On the fourth change, the region will be “locked in.” That is, the drive will only play DVDs and BDs from that last region. Note that changing from region 1 to region 2 and back to region 1 is counted as two changes. NOTE For optimum DVD and BD performance, it is recommended that you play DVDs and BDs while running the computer on AC power. NOTE When viewing DVD and BD movies use the DVD or BD player software that came with your computer. Viewing Blu-ray Disc™ movies Your system may come with a Blu-ray Disc™ drive. Due to differences between High Definition and previous viewing capabilities, consider the following: . Use an HDCP (High-Bandwidth Digital Content Protection) HDMI™ cable to view High Definition content via your Blu-ray Disc™ drive on an external monitor or television. The external monitor or television must support HDMI™. Learning the Basics 108 Using the optical disc drive . Some Blu-ray Disc™ movies have online content that can be accessed from the disc. To view this content, your computer must be connected to the Internet. . While viewing online content, your system may not view it in High Definition on an external monitor, even though your display setting is set to simultaneous. This is due to the lower resolution used in the simultaneous setting. For more information on your computer’s display settings, see “Directing the display output when you turn on the computer” on page 81. . When an HDMI™ cable is used to send a High Definition signal to an external monitor the audio signal is automatically sent with the video signal. If you want to change the destination of the audio signal, use the Sound properties in the Control Panel. (Sample Image) Sound properties window . If you want to use the internal speakers, click on the Speakers tab and click Set Default. . Use the arrow keys on your keyboard to navigate within the Blu-ray Disc™ player console. NOTE Use of the touchpad or a mouse is not supported within the Blu-ray Disc™ player. Learning the Basics 109 Using the optical disc drive Optical disc drive components The optical disc drive is located on the side of the computer. Your optical disc drive may look like this: (Sample Illustration) Optical disc drive Drive in-use indicator light Eject button Manual eject hole Drive in-use indicator light—Indicates when the drive is in use. Eject button—Press to release the disc tray. Do not press the eject button or turn off the computer while the drive in-use indicator light is glowing. Doing so could damage the disc or the drive. When the disc tray is open, be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. Manual eject hole—Use if you need to release the disc tray when the power is off. Use a straightened paper clip or other narrow object to press the manual eject button located inside the hole. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and dama...
Эта инструкция также подходит к моделям:Ноутбуки - Satellite L640-BT2N13 (2.82 mb)
Ноутбуки - Satellite L640-BT2N15 (2.82 mb)
Ноутбуки - Satellite L640-BT2N22 (2.82 mb)
Ноутбуки - Satellite L640-ST2N01 (2.82 mb)