Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
TECHNICAL NOTE: You can also change these settings using the Display Properties Box. Set the option for the video controller by clicking Start, then Control Panel, Appearance and Themes, and then Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, and click Apply or OK. 70 70 Getting Started Using an external keyboard Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps. TECHNICAL NOTE: To use one of the simultaneous modes, you must set the resolution of the internal display panel to match the resolution of the external display device. The external display device must support a resolution of 800 X 600 or higher. Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer. The computer’s USB ports support any USB- compatible keyboard. Using a mouse You may want to use a mouse instead of the computer’s built- in TouchPad. You can use a USB-compatible mouse. NOTE After logging on to your system, the mouse cursor may move to the upper-right side of the screen. If this occurs, press the Esc or Windows key to return it to its original position. Getting Started 71 Connecting a local printer Connecting a local printer NOTE Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly. Read the documentation that came with your printer. Follow the manufacturer’s instructions when connecting a printer. Connecting a USB printer You can connect a USB-compatible printer to your computer through the USB ports. To determine if the printer is USB compatible, check its documentation. To make the connection, you need a suitable USB cable which may come with your printer. If a USB cable was not included with your printer, you can purchase one from a computer or electronics store. If your printer supports Plug and Play, your computer will automatically recognize the printer; the printer is then ready for use. Refer to your printer documentation for further instructions. TECHNICAL NOTE: To determine if your printer supports Plug and Play, check its documentation. If your printer does not support Plug and Play, you must set up the printer as described in “Setting up a printer” on page 72. To connect a USB printer to your computer: 72 72 Getting Started Connecting a local printer 1 Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports. 2 Plug the printer’s power cable into a live AC outlet. Setting up a printer NOTE Some printers require a specific installation process. Refer to your printer installation guide for instructi...
Эта инструкция также подходит к моделям:Ноутбуки - Satellite A100-S2211TD (3.3 mb)
Ноутбуки - Satellite A100-S2311TD (3.3 mb)
Ноутбуки - Satellite A100-S8111TD (3.3 mb)
Ноутбуки - Satellite A100-ST1041 (3.3 mb)