Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
Should this happen, allow the computer to cool down then switch the power on again. If the computer still does not power on, contact Panasonic Technical Support. • If the computer has not been used for a long period of time, it may produce an unusual sound at start up. The sound may continue for a short period of time, but if the computer starts up in a normal manner, then the problem is not serious. If, however, the computer fails to start up, contact Panasonic Technical Support. If security indicator (Q) is displayed, you must first enter your password (G= “Security Measures”) Upon entering your password and pressing C Enter) If the correct password is input, I Over three incorrect attempts, Will Not Start* * If after three attempts the conect password is not input, or if no pass- ^Powe^ff)| word is entered for about a minute, the computer returns to the condition just before the attempt was made to start up the computer > When an application or file that was previously displayed appears on your screen, the standby or hibernation mode (O’ “Standby/Hibernation Functions”) has been set. 15 Getting Started Getting Started Starting Up/Shutting Down 3 gm.imij« Select your operating system _ Select “Windows NT Workstation Version 4.00” and press C Enter 3. 4 —ii* Logon _ Press CctrD+CMD+CBiD Input your password Wait for 10 seconds after confirming that the HDD access has been completed, input the user name and password, then select [OK]. Until the correct user name and password are entered, the computer will not operate. —■»a If [Cancel] is selected, the computer will return to the initial [Begin Logon] display. 6 Select your application You are able to start working on your computer. Xnote)---\ • The power saving function is factory set, so if there is no input from a key, the touch pad or an external mouse (when one is connected) for a certain interval of time, the power to the LCD and hard disk may be turned off. The LCD will resume operation when the touch pad or an external mouse (when one is connected) is used or a key is pressed. The power to the LCD may be turned off while Windows is setting up or even when an application software is being installed. In this case, because it is conceivable that a selection dialog box will be shown, do not press (Space ) or C Enter 1 to attempt to resume from this condition as doing so may trigger a selection, but instead, press a key unrelated to the direct triggering of a selection, like CCtrO In addition, when the computer is left alone, it automatically enters the standby*1 mode (Q3 'wuiiuaf6 “Standby/Hibernation Functions”). The computer will resume by pressing the power switch. «Hi» a—n—i • [System devices] in [Start] - [Settings] - [Control Panel] - [System]*2 > [Device Manager] may contain a device or devices bearing an exclamation mark or question mark. This does not indicate a malfunction. Such a mark (exclamation mark or question mark) will not be displayed if the operating environment of the device showing the mark is corrected, by for instance installing the driver of the device. *’ Windows 2000: standby or hibernation *2 Windows 2000: [System] - [Hardware] 16 Shutting Down (power off your computer) This procedure is shutting down without using the standby or hibernation function. (Gr* Manual* “Standby/Hibernation Functions”) 1 Display the shut down screen After saving important data and closing each application, select [Shut Down] from the [Start] menu. /note). From the keyboard, You may choose to press down on (jgf) , then select the menu with or ©• Confirm shut down CBB9BBB Select [OK] after selecting [Shut down], —BUM Select [Yes] after selecting [Shut down the computer?]. Your computer will power off automatically. /note) For the computer to automatically shut down after [Shut down the computer?] is selected, Phoenix APM 2.0 for Windows NT® has to be installed. When Q or displayed on the task tray, this indicates that the program is installed. is > Restarting your computer (without shutting down) —an nmmum Select [OK] after selecting [Restart]. mrnamm Select [Yes] after selecting [Restart the computer?]. /note)--- To quickly resume computer operation after shutting down, The standby or hibernation function is available. (C^ l^tia]ce “Standby/Hibernation Functions”) 17 Getting Started Operation Touch Pad (Basic Operation) Work Surface Left Button Use the touch pad to move the cursor on the display and perform normal computer operations. For instructions on how to operate, refer to R$^ce “Touch Pad (Advanced)”. ÆD-;-1 The touch pad has been designed to work only when a finger is used. Therefore, do not use ^ any implement on the touch pad._^ rBasic-Qperation-| Function Touch Pad Operation Moving the Cursor Move the tip of your finger lightly over the surface. Tapping/Clicking or clicking ^ J Double-Tapping/ Double-Clicking ^_ ^double-clicking Dragging or Two quick taps...