Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Philips, модель M1BTGY/00

Производитель: Philips
Размер: 529.58 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Tip ••If you turn on the mobile phone/Bluetooth device or activate the Bluetooth feature after turning on the headset, you have to reconnect the headset and mobile phone/Bluetooth device manually. Manage your calls and music Call/Music button Task Operation Sound or LED indicator Turn the headset on. Press and hold for 2 seconds. • 1 short beep • 3 white flashes: battery low < 25% • 2 white flashes: battery level < 50% • 1 blue flash: battery level > 50% Turn the headset off. Press and hold for 4 seconds. • 1 long beep • 1 long white flash Play or pause music. Press once. 1 short beep Pick up/ hang up a call. Press once. 1 short beep Reject an incoming call. Press and hold 1 short beep Redial the last number. Press twice. 1 short beep Switch caller during a call. Press twice 1 long beep Volume/Track control button Adjust volume. Turn up/ down N/A Skip forward. Press once 1 short beep Skip backward. Press twice 1 short beep Mute/unmute the microphone in a call. Press once 2 short beeps Other headset indicator status Headset status Indicator The headset is connected to a Bluetooth device, while the headset in standby mode or while you are listening to music. Blue LED flashes for every 8 seconds. The headset is ready for pairing. LED flashes blue and white alternately. The headset is on but not connected to a Bluetooth device. Blue LED flashes quickly. There is an incoming call. Blue LED flashes once per second. EN Low battery. White LED flashes. Battery is fully charged. White LED is off. Wear your headset Adjust the headband to fit your head. Tip ••After use, twist the headset for easy storage. Use with the audio cable Note ••Make sure that you turn off Bluetooth headset before connecting the audio cable. With the supplied audio cable, you can use the headset with non-Bluetooth devices or on airplane. No battery power is required for the headset when you use it with the audio cable. Connect the supplied audio cable to • the headset and; • an external audio device. EN 5 Technical data • Minimum 10 hours of music time or talk time • Minimum 350 hours of standby time • Normal time for a full charge: 3 hours • Rechargeable Lithium-ion battery (230 mAh) • 3.5 mm audio jack for corded headset mode • Bluetooth 4.0, Bluetooth mono support (Headset Profile - HSP, Hands-Free Profile - HFP), Bluetooth stereo supported (Advanced Audio Distribution Profile - A2DP; Audio Video Remote Control Profile - AVRCP) • Operating range: Up to 15 meters (50 feet) • Digital echo & noise reduction • Supports SBC, AAC and aptX® audio • Auto power off Note ••Specifications are subject to change without notice. EN 6 Notice Declaration of conformity Hereby Philips Consumer Lifestyle, declares that the M1BT is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on com. This product has been designed, tested and manufactured according the European R&TTE directive 1...

Эта инструкция также подходит к моделям:
Наушники - M1BTBL/00 (529.58 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории