Applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. Contact the factory for applications other than those listed, and for liquids other than water. SPECIFICATIONS INLET AND OUTLET CONNECTIONS: .” MPT or 5/8 Flare Tube Conn. Or Center Inlet Style ELECTRICAL: 809 115 Volts, 60 Hz, 1 Phase, 30 Watts, 0.3 Amps, 1600 RPM, 1/100 HP 809 HS 115 Volts, 60 Hz, 1 Phase, 80 Watts, 1.2 Amps, 3400 RPM, 1/25

packaging kg 5 ELECTRICAL CONNECTIONS 5.1 Nominal voltage; fusing V/A 5.2 Nominal power consumption 1) A2 W35 kW 5.3 Starting current with soft starter A 5.4 Nominal current A2 W35/cos A /--6 COMPLIES WITH EUROPEAN SAFETY REGULATIONS 7 OTHER DESIGN CHARACTERISTICS 7.1 Defrosting Type of defrosting Defrost pan available 7.2 Heating water inside unit protected against freezing 2) 7.3 Performance settings 7.4 Controller internal / external LI11MS IP 21 Indoors Max. 55 / min. 18 -20 to +35 7.5 7.6 /

The heat pump is designed for installation indoors, with air ducts or hoses providing inlet/outlet air from the outside. For space saving, a built-under buffer tank is also available. LI MS / LI AS RANGE KEY FEATURES: Range of 2 models with nominal heating capacities of 11kW (single phase) and 16kW (three phase). Indoor installation in a basement, utility room or garage. Air ducting kits provided as accessories. Complementary built-under buffer tank for space saving. Operational temperatures fro

/ Order no. / No de commande : 452159.66.17 FD 8703 Table of contents 1 Please Read Immediately .............................................................................................................E-2 1.1 Important Information..............................................................................................................................E-2 1.2 Legal Regulations and Directives....................................................................................................

......................................................................................................................................................................................................@ ............................................................................................ ......................................@ ........................................................................................ ........................................@ ....................................

.......................................... ........................................ 3.4 3.4 Legende / Legend / Legende E1 E2 Olsumpfheizung Verdichter 1 Olsumpfheizung Verdichter 2 Oil sump heater for compressor 1 Oil sump heater for compressor 2 Chauffage a carter d’huile compresseur 1 Chauffage a carter d’huile compresseur 2 E4 Dusenringheizung Ventilator Nozzle ring heater, ventilator Chauffage a couronne perforee ventilateur F4 Pressostat Hochdruck Verdichter 1 High-pressure switch, compress

A-II 1.2 1.2 Ma.bild / Dimension Drawing / Schema cote LA 22PS - LA 26PS ...........................................................................................................................................................................................................................................................................................................................................................................................................................................

For detailed instructions concerning the connection and functioning of the heat pump controller refer to the operating manual supplied with the controller. MOUNTING CAUTION! correct). 7 An all-pole disconnecting device with a contact gap of at least 3 mm (e.g. utility company disable contactor or power contactor) as well as a 3-pole circuit breaker with simultaneous tripping of all external conductors must be provided . The required cross- sectional area of the conductor is to be selected accord

The collector loops including brine manifold must be provided by the customer. 1 23 4 1) Condenser 3) Evaporator 2) Control panel 4) Compressor 4 ACCESSORIES TRANSPORT ACCESSORIES TRANSPORT 45 4.1 Brine Manifold The brine manifold ties the individual collector loops of the heat source system into a single main line which is connected to the heat pump. Integrated ball valves allow individual brine circuits to be shut off for venting purposes. A lift truck is suited for transporting the unit on a

5CS bis .. 17CS 30 12.4.3 Terminal Diagram .. 5CS to .. 17CS 31 12.4.4 Legend .. 5CS to .. 17CS 32 12.4.5 Control .. 21CS 33 12.4.6 Load .. 21CS 34 12.4.7 Terminal Diagram .. 21CS 35 12.4.8 Legend .. 21CS 36 12.5 Hydraulic Block Diagram 37 12.6 EC Declaration of Conformity 38 12.7 Warranty Certificate 39 11 APPENDIX: 12.1 DIMENSIONED DRAWINGS 12.1.1 Dimensioned Drawing .. 5CS - 14CS Heating water supplyHeat pump outletHeating water returnHeat pump inlet Heat source supplyHeat pump outletHeat sou