THOMAS, ONTARIO, CANADA Printed in U.S.A. ©Copyright by the Gorman-Rupp Company IK WARNING! | The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. TABLE OF CONTENTS INTRODUCTION..................................................................................................PAGE I - 1 SAFETY - SECTION A........................................................................................PAGE A

If overheating occurs, stop the pump and allow it to cool before servicing it. Refill the pump casing with cool liquid. A WARNING! I Do not remove plates, covers, gauges, pipe plugs, or fittings from an overheated pump. Vapor pressure within the pump can cause parts being disengaged to be ejected with great force. Allow the pump to cool before servicing. Strainer Check If a suction strainer has been shipped with the pump or installed by the user, check the strainer regularly, and clean it a

203719A Revision - (01/21/08) EXPLODED VIEW Copyright © 2008 Briggs & Stratton Power Products Group, LLC. All rights reserved. No part of this material may be reproduced or transmitted in any form by any means without the express written permission of Briggs & Stratton Power Products Group, LLC. 2 BRIGGSandSTRATTON.COM PARTS LIST Item Part # Description Item Part # Description 1 200673GS TUBE, Infeed 24 200689GS KIT, Valve Plate 2 200674GS VALVE, Relief 25 * SCREW, Taptite M5 x 20 3 1999

203721A Revision - (01/21/2008) EXPLODED VIEW 4 Copyright © 2008 Briggs & Stratton Power Products Group, LLC. All rights reserved. No part of this material may be reproduced or transmitted in any form by any means without the express written permission of Briggs & Stratton Power Products Group, LLC. 2 BRIGGSandSTRATTON.COM PARTS LIST Item Part # Description 1 199175GS DECAL, Hot Surface 2 * SCREW, M8 x 45 3 200699GS CONVEYOR, Air 4 * PPHMS, 5 x 12 5 201389GS PLATE, Filter 6 200697GS

SAFETY - RELEVANT DATA Thank you for purchasing a MiniCAFS unit. MiniCAFS is designed to give safe and reliable service – however, BEFORE operation it is essential that the Operating Instructions are carefully read and understood. A risk-assessment of this equipment has been conducted with the following results: MAINTENANCE It is the responsibility of the user to ensure that the equipment is maintained in a safe operational condition, as per regulation 5 in the Provision and Use of Work Equipmen

Check oil level frequently at higher temperatures. Synthetic 5W-30 .20 to 120F(.30 to 40C) provides the best protection at all temperatures as well as improved starting with less oil consumption. 5W-30 40F and below (5C and below) is recommended for winter use, and works best in cold conditions. Oil Capacity The engine holds approximately 5/8 qt. (20 oz; 0.6 liter). Adding Oil • Check oil level before starting the engine. • Keep oil level at FULL. • Check level daily, or after every eight (8) ho

6. Damage or wear to parts caused by dirt, which entered the engine because of improper air cleaner maintenance, re-assembly, or use of a non-original air cleaner element or cartridge. (At recommended intervals, clean and re-oil the Oil-Foam. element or the foam pre-cleaner, and replace the cartridge.) Read Operating & Maintenance Instructions. 7. Parts damaged by overspeeding, or overheating caused by grass, debris, or dirt, which plugs or clogs the cooling fins, or flywheel area, or damage cau

17 About your engine warranty: (see next page for statement of LIMITED WARRANTY). Briggs & Stratton welcomes warranty repair and apologizes to you for being inconvenienced. Any Authorized Service Dealer may perform warranty repairs. Most warranty repairs are handled routinely, but sometimes requests for warranty service may not be appropriate. For example, warranty would not apply if engine damage occurred because of misuse, lack of routine maintenance, shipping, handling, warehousing or imprope

(See Maintenance.) ¦After engine has started, let it warm up several seconds to several minutes, depending on outside temperature. ¦For maximum performance and life, operate engine with choke in RUN and throttle in FAST. 8 STARTING AND STOPPING STARTING AND STOPPING REWIND (MANUAL) STARTER TO START ENGINE [1] Check oil level (see p. 7). [2] If choke and throttle controls are separate, move choke control to CHOKE. Move throttle to FAST. [3] If choke and throttle are on the same control, move leve

TABLE OF CONTENTS Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 Engine Information . . . . . . . . . . . . . . . . . . . . . . . . 6 Oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Fuel and Starting Information . . . . . . . . . . . . . . . 8 Starting and Stopping . . . . . . . . . . . . . . . . . . . 9-10 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 11-13 Adjustments . . . . . . . . . . . . . . . . . . . . . . .