Войти:
Оценок - 4, средний балл: 3.5 ( )

Инструкция по эксплуатации Campbell Hausfeld, модель AC2-8E

Производитель: Campbell Hausfeld
Размер: 2.53 mb
Название файла:
Язык инструкции:enfr
Перейти к скачиванию



Фрагмент инструкции


Sprayed materials such as paint, paint solvents, paint remover, insecticides, weed killers, etc. contain harmful vapors and poisons. Serious injury could occur from touching exposed metal parts. These areas can remain hot for some time after the air compressor is shutdown. Soft tissue damage can occur from the compressed air stream. Serious injury can occur from loose debris being propelled at a high speed from the compressed air stream. Never inhale air from the air compressor either directly or from a breathing device connected to the air compressor. Operate air compressor only in a well ventilated area. Follow all safety instructions provided with the materials you are spraying. Use of a respirator may be required when working with some materials. Never allow any part of your body or other materials to make contact with any exposed metal parts on the air compressor. Always wear safety glasses to shield the eyes from flying debris. Never point the air stream at any part of your body, anyone else or animals. Never leave pressurized air in the air compressor. Shut off air compressor and relieve pressure when storing or attempting maintenance. Always maintain a safe distance from people and animals while operating the air compressor. Do not move the air compressor while air tank is under pressure. Do not attempt to move the air compressor by pulling on the hose. IMPORTANT SAFETY INSTRUCTIONS READ ALL SAFETY INSTRUCTIONS BEFORE USING AIR COMPRESSOR HAZARD IMPORTANT SAFETY INSTRUCTIONS READ ALL SAFETY INSTRUCTIONS BEFORE USING AIR COMPRESSOR POTENTIAL CONSEQUENCE PREVENTION RISK FROM MOVING PARTS RISK FROM NEGLIGENCE RISK OF AIR COMPRESSOR DAMAGE Risk of bodily injury from moving parts. This air compressor cycles automatically when the pressure switch is in the "On/Auto" position. Risk of injury from negligent use. Risk of major repair. Before performing maintenance, always turn off air compressor. Bleed pressure from the air hose and unplug electrical cord from outlet. All repairs to the air compressor should be made by an Authorized Service person. Never assume the air compressor is safe to work on just because it is not operating. It could restart at any time! Do not operate without protective covers/guards. Always unplug the air compressor before removing any guard. Replace damaged covers/guards before using the air compressor. Never allow children or adolescents to operate this air compressor! Stay alert-watch what you are doing. Do not operate the air compressor when fatigued or under the influence of alcohol or drugs. Know how to stop the air compressor. Be thoroughly familiar with controls. Do not operate air compressor without an air filter. Do not operate air compressor in a corrosive environment. Always operate the air compressor in a stable, secure position to prevent air compressor from falling. Follow all maintenance instructions listed in this manual. HAZARD ! SAVE THESE INSTRUCTIONS ! Portable Electric Air Compressor Manual 8 Portable Electric Air Compressor Manual ELECTRIC AIR COMPRESSOR FEATURES (SINGLE STAGE) AC1-PE15-20 FEATURES-041205-DLG AC1-PE15-FEATURE 8 GAL.-041205-DLG 1. Decal- Danger/Warning/Caution 2. Outlet Fitting 3. Decal- Warning: Hot Surface 4. Tank Drain Valve 5. Pump Oil Drain 6. Check Valve 7. Air Compressor Pump 8. Pump Oil Fill Port 9. Thermal Overload 10. Electric Motor 11. Pump Discharge Line 12. Beltguard 13. Decal- Warning: Risk of Injury 14. Decal- Warning: Beltguard in Place 15. Air Filter 16. Ventilation Holes 17. Pressure Switch 18. Pressure Relief Valve 19. Pressure Gauge- Tank PSI 20. Pressure Gauge- Outlet PSI 21. Pressure Regulator 22. Electric Power Cord Portable Electric Air Compressor Manual 9 EXPLODED VIEW & EXPLANATION OF AIR COMPRESSOR FEATURES SAFETY RELIEF VALVE: This valve is designed to prevent system failures by relieving pressure from the system when the compressed air reaches a predetermined level. The valve is preset by the manufacturer and must not be modified in any way. To verify the valve is working properly, pull on the ring. Air pressure should escape. When the ring is released, it will reset. MOTOR/PRESSURE SWITCH: This switch is used to start or stop the air compressor. Moving the switch to the "Auto" (On) position will provide automatic power to the pressure switch which will allow the motor to start when the air tank pressure is below the factory set "cut-in" pressure. When in the Start/Stop Option, the pressure switch stops the motor when the air tank pressure reaches the factory set "cut-out" pressure. For safety purposes, this switch also has a pressure release valve located on the side of the switch designed to automatically release compressed air from the air compressor pump head and its discharge line when the air compressor reaches "cut-out" pressure or is shut off. This allows the motor to restart freely. Moving the switch to the "Off" position will remove power from the pressure switch and stop the air compressor. AIR INTAKE FIL...

Эта инструкция также подходит к моделям:
Насосное оборудование - AC1-20E (2.53 mb)
Насосное оборудование - AC1-20E (2.53 mb)
Насосное оборудование - AC1-8E (2.53 mb)
Насосное оборудование - AC2-20E (2.53 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории