Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Do not reach over or across running machines or air hoses. Page 2 SKU 04077 9. Maintain tools with care. Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords and air hoses periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times. 10. Disconnect Compressor. Disconnect cigarette lighter plug in when not in use. 11. Avoid unintentional starting. Be sure the thumbwheel switch is in the Off position when not in use and before plugging in. 12. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired. 13. Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly. 14. Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures. 14. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 16. Do not operate tool is under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not operate the Compressor. 17. Maintenance. For your safety, maintenance should be performed regularly by a qualified technician. Note: Performance of the compressor (if powered by line voltage) may vary depending on variations in local line voltage. Warning:The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Unpacking When unpacking, check to make sure the parts listed on page 5 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. Page 3 SKU 04077 Operation 1. Remove the Power Cord/Cigarette Plug (#11) from the recessed holder on the unit. See FIGURE 1. FIGURE 1 Cord/Cigarette Plug (#11) Holder 2. Check to make sure the Thumbwheel Switch on the power cord is in the “off” position. EXPLOSION DANGER Before inflating tires or toys check the manufacturer’s recommended air pres- sure. Do not exceed that pressure. Over inflation may result in an explosion. 3. Situate the Compressor outside of the car. 3. Plug the Cord/Cigarette Plug (#11) into the 12 Volt receptacle (or cigarette lighter) in the car. If you run your car to charge the battery while using this Compressor, never run the car in an enclosure of any kind. Your car emits Carbon Monoxide, an odorless, colorless gas, which is extremely lethal. Note: When attaching the Air Outlet (#6) to a tire or adapter, lift the Valve Lock (see Assembly Drawing on page 6. Then attach the hose to the tire or adapter, and then lock down the Valve Lock. To remove it from the tire or adapter, lift the Valve Lock and remove. 4. If you are going to fill a standard tire, then no adapter is needed as the Air Outlet (#6) end has a universal tire adapter. 5. To fill a standard athletic ball, thread on the Sports Needle accessory. 6. When using the unit as an air blower, thread on the appropriate sized adapter (two included). See FIGURE 2 Warning! Make sure that no one is touching the Compressor when it is in operation. The Compressor will become very hot; avoid being burned. 7. Attach the Compressor to the item you wish you inflate as explained in the Note above. 8. Turn on the Compressor by sliding the Thumbwheel to the “on” position. Warning!: Do not allow the Compressor to run for more than 15 minutes at a time. After 15 minutes, allow it to cool for 5 minutes, and then you may resume inflation. Failure to do so may cause the unit to overheat and burn out. 9. When you are finished, turn off the Compressor by sliding the Thumbwheel to the “off” position. Lift up on the Valve Lock and unplug the unit. Store the Cord/Cigarette Plug (#11) in the recessed holder in the unit. FIGURE 2 Air Adapters Ball Needle Page 4 SKU 04077 Parts List Part No. Description 1 Hull 2 Cylinder Head 3 Gauge 4 Plug 5 Rubber Hose 6 Air Outlet 7 Seal 8 Motor 9 Shaft 10 Gasket 11 Power Cord/Cigarette Plug Maintenance 1. Visually inspect the unit before each use to m...