Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Install the flare cap with the proper size orifice to match the flow rate desired and open the ^ turn valve. Direct the water flow in to a large container, sink, or floor drain for at least 20 seconds. Read the pressure gauge while the water is flowing. If the gauge maintains 25 PSIG or higher, the water supply is sufficient for the flow rate that was selected. Part Number Stamp Number Orifice Diameter Flow Rate in Gallons Per Hour (GPH) at 25 PSIG 620718954 1 1/8” 100 GPH 620718955 2 3/16” 200 GPH 620718956 3 13/64” 300 GPH Release Date: August 23, 2004 © 2004, IMI Cornelius Inc. - 1 - Revision: A Publication Number: 629088461INS...
Эта инструкция также подходит к моделям:Насосное оборудование - 620718954 (96.1 kb)
Насосное оборудование - 620718955 (96.1 kb)