@ 0 Level meter mode select switch • The position of this switch will determine the Level Meter mode. In the “MASTER” position, the meter will detail the out level of the left and right channels. In the “PGM 1/2” position, the left side of the meter will indicate monaural level of the PGM 1 and the right side of the meter will indicate monaural level of the PGM 2. @ 1 Channel Fader • Controls the channel output level. @ 2 Level meter • The dual LED's indicators are used to detail either the mast

3 PART NAMES AND FUNCTIONS (Refer to page 3.) (1) Top panel q Power operation switch (POWER) • The power turns on when the button is switched from the off position (.) to the on position (.). • The power turns off when the button is switched from the on position (.) to the off position (.). w MASTER BALANCE control • Adjusts the L/R balance of the MASTER output. e MASTER LEVEL control • Adjusts the level of the MASTER outputs. r BOOTH ASSIGN switch • Selects the source of the BOOTH output. t BOO

Doing so with the power turned on could cause damage. Accessories Check that the following parts are supplied with the product. 2 Make the preparations for mounting the option board. □ When mounting an option board for the first time Remove the two screws fixing the cover, then remove the cover. Reuse the two fixing screws to fasten the option board. Be sure to keep the removed cover for future use. □ When replacing option boards © Remove the two screws fixing the option board. w Screw