Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. A battery is supplied with the unit. The life of this battery may be limited, however, since its primary purpose was to enable testing. Copyright © 2001 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION. Features . Stereo output gives your sound greater breadth along with a deep effect that imparts a sense of three-dimensional rotation. . Includes a new “ULTRA” mode for a more intense flanging effect. . Also features a “GATE/PAN” mode. When outputting in mono, a slicer effect is added to the flanging sound, resulting in a “gate flanger” effect; and when using stereo output, you get a flanging effect that is panned three-dimensionally across the sound field. . Includes a “MOMENTARY” mode, which allows you to apply the flanger effect exactly at the point in a phrase you want. . Also includes a “Tap Tempo” function that lets you set the RATE to the tempo at which the pedal is pressed. Panel Description 12 4 5 6 7 1. AC Adaptor Jack Accepts connection of an AC Adaptor (optionally available BOSS PSA-Series). By using an AC Adaptor, you can play without being concerned about how much battery power you have left. * Use only the specified AC adaptor (PSA- Series), and make sure the line voltage at the installation matches the input voltage specified on the AC adaptor's body. Other AC adaptors may use a different polarity, or be designed for a different voltage, so their use could result in damage, malfunction, or electric shock. * As soon as you connect the AC adaptor, the unit is turned on. * If there is battery in the unit while an AC adaptor is being used, normal operation will continue should the line voltage be interrupted (power blackout or power cord disconnection). Panel Description 2. CHECK Indicator This indicator shows whether an effect is ON/OFF, indicates the tempo (TEMPO mode: p. 11–12), and also doubles as the Battery Check indicator. The indicator lights when an effect is ON. * If this indicator goes dim or no longer lights while an effect is ON or while the BF-3 is in TEMPO mode, the battery is near exhaustion and should be replaced immediately. For instructions on changing the batteries, refer to “Changing the Battery” (p. 14). * The CHECK indicator shows whether the effect is being applied or not, and is used to indicate other effects. It does not indicate whether the power to the device is on or not. 3. OUTPUT A (MONO)/ OUTPUT B Jack The output jacks are used to connect the unit to an amplifier or another effects unit. For monaural use, make the connection to the OUTPUT A (MONO) jack. 4. GUITAR IN Jack This jack accepts input signals (coming from a guitar, some other musical instrument, or another effects unit). 5. BASS IN Jack This jack accepts input signal coming from a bass guitar. * BASS IN is disabled when the GUITAR IN jack is used. * When running the unit on battery power, the GUITAR IN and BASS IN jacks double as power switches. Power to the unit is turned Panel Description on when you plug into the GUITAR IN or BASS IN jack; the power is turned off when the cable is unplugged. Be sure to disconnect any cord plugged into the GUITAR IN or BASS IN jack when not using this effects device. 6. Pedal Switch Used for switching effects on/off, and for inputting the tempo. * You cannot input the tempo in MOMENTARY mode. 7. Thumbscrew When this screw is loosened, the pedal will open, allowing you to change the battery. * For instructions on changing the batteries, refer to “Changing the Battery” (p. 14). 8910 11 12 8. MANUAL Knob Adjusts the center frequency to which the effect is applied. The range is raised as you turn the knob to the right (clockwise). * The settings range varies with the selected mode, as well as when an instrument is connected to BASS IN. Panel Description 9. RES (resonance) Knob Adjusts the amount of resonance (feedback). The more the knob is turned to the right, the more the flanger sound is emphasized, and the stronger the characteristic effect in the sound becomes. 10. DEPTH Knob Adjusts the sweep depth. The effect deepens as you turn the knob to the right. * The MANUAL knob has no function when this knob is turned completely clockwise. 11. RATE Knob Adjusts the rate of the flanging. The flange effect speeds up as you turn the knob to the right. 12. MODE Knob Selects the flanger effect and pedal mode. ULTRA: Provides a stronger flanger effect than STANDARD. STANDARD: Provides a normal flanger effect. GATE/PAN: When playing in mono, this ...
Эта инструкция также подходит к моделям:Музыкальные инструменты - BF-3 (662.21 kb)