Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifi cations at any time without prior notice. Since specifications, equipment or options may not be the same in ever y locale, please check with your Yamaha dealer. MW10 Owner's Manual Foreword Foreword d Thank you for choosing a Yamaha MW10 USB Mixing Studio. The MW10 includes an audio mixer equipped with a USB interface for digital audio data transfer, and Cubase LE DAW (Digital Audio Workstation) software for Windows® and Macintosh® computer operating systems. With the MW10 USB Mixing Studio and your personal computer you have the basic elements of a high-performance computer recording system that is easy to set up and operate. In order to take full advantage of the many features and capabilities provided by the MW10, we urge you to read this owner’s manual thoroughly before using your MW10 system, and keep the manual in a safe, accessible location for future reference. Features Connect To Your Computer via a Single USB Cable (page 7) The MW10 mixer connects to your computer via the supplied USB cable. Stereo audio data is transferred in both directions—from the mixer to the computer, and vice-versa—via the USB connection (44.1 kHz or 48 kHz sampling frequency). No Driver Installation Required (page 7) The MW10 system uses the standard drivers included in your computer’s operating system, so there’s no need to install any extra driver software. Cubase LE DAW Software Supplied (page 7) Cubase LE software, included in the MW10 package, offers versatile, high-performance hard-disk recording capability. 3-Band EQ On Each Channel (page 15) Each channel of the MW10 mixer features full 3-band equalization, providing broad, musical response-shaping capability. Mixer Functions (page 15) With up to four mic/line inputs or up to four stereo inputs, the MW10 can simultaneously connect to a wide range of devices: microphones, line-level devices, stereo synthesizers, and more. For example, you can connect two microphones and four stereo devices, or four microphones and two stereo devices. 48V Phantom Power (page 16) A PHANTOM switch supplies +48V phantom power to the mixer’s microphone inputs, so you can use high-quality phantom-powered condenser microphones for superior recording quality. Contents Foreword ................................................... 5 Features ............................................................... 5 Contents .............................................................. 5 Before Turning on the Mixer ................................. 6 Turning the Power On/OFF .................................. 6 Computer System Requirements ........................ 6 Cubase LE System Requirements ...................... 6 Quick Guide ............................................... 7 1. Installing Cubase LE ...................................... 7 2. Connections ................................................... 7 3. Powering Up the System ................................ 8 4. Adjusting Level and Equalization ................... 9 5. Recording with Cubase LE ........................... 10 6. Mixing with Cubase LE ................................. 13 Front & Rear Panels ............................... 15 Channel Control Section .................................... 15 Master Control Section ...................................... 16 Input/Output Section .......................................... 17 Rear Section ...................................................... 19 Setting Up ................................................ 20 Setup Procedure ................................................ 20 Setup Examples ................................................ 20 Troubleshooting ...................................... 21 Appendix ................................................. 23 Specifications .................................................... 23 Dimensional Diagrams ...................................... 25 Block Diagram and Level Diagram .................... 26 SOFTWARE LICENSE AGREEMENT ..... 27 English MW10 Owner's Manual 5 Foreword Foreword English Before Turning on the Mixer 1 Be sure that the mixer’s power switch is in the STANDBY position. Use only the PA-10 adaptor included with this mixer. Use of a different adaptor may result in equipment damage, overheating, or fire. 2 Connect the power adaptor to the AC ADAPTOR IN connector (1)on the rear of the mixer, and then turn the fastening ring clockwise (2) to secure the connection. 12 3 Plug the power adaptor into a standard household power outlet. • Be sure to unplug the adaptor from the outlet when not using the mixer, or when there are lightning storms in the area. •To avoid generating unwanted noise, make sure there is 50 cm or more between the power adaptor and the mixer. Turning the Power On/OFF Press the mixer's power switch to the ON position. When you are ready to turn the power off...