Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
All signals are before the source fader. • MIC ... The MIC signal input after the mic amp but before the MIC fader. • INST ... The INST signal input before the INST fader. • MASTER OUT ... The mixed signal output from the MASTER OUT jacks. Input signals are monitored before the faders, and output signals are monitored after the faders. PHONES LEVEL control The MONITOR LEVEL control regulates the level of the headphone monitor signal. The headphone will monitor the signal selected by the MONITOR SELECT switches. PHONES jack Connect a pair of stereo headphones to this jack to monitor the signal selected by and regulated by ® . POWER indicator When the rear panel power switch is turned on, this indicator will light. REAR PANEL < Input Section > $ PHONO inputs Pin jack inputs for a record player. The MJ100 has a built-in phono RIAA EQ amp, and record players can be di rectly connected. Do not connect any other type of equipment to these jacks. *1^ AUX inputs Line level pin jack inputs. Connect tuners or other standard audio sources. CD inputs Line level pin jack inputs. Connect CD players, etc. $ TAPE inputs Line level pin jack inputs. Connect cassette or open reel decks, etc. $ INST inputs Line level phone jack inputs. Connect electric or electronic instruments, rhythm machines, etc. 0 GND Connect the record player grounding wire to the provided grounding terminal. < Master Section > ® MASTER OUT jacks Output (standard phone jack) of the final mixed and equalized signal. Connect these outputs to the power amp system. LINE OUT jacks Output (PIN jack) of the mixed signals. Connect these outputs to a recording deck, or (if using the MJ100 as a submixer) to the main mixer. AUX SEND jack Output (standard phone jack) for when using an external effect unit. Connect this output to the input of the external effect unit (reverb unit, delay unit, limiter, etc.). <3D AUX RETURN jacks Inputs (standard phone jack) for when using an external effect unit. Connect the output of the external effect unit to these inputs. When using these inputs, the MJIOO’s built-in delay unit will not operate. <£) POWER switch The power switch. When power is switched ON, the front panel indicator @ will light. When power is switched OFF, the indicator will go out. 6 SETUP EXAMPLE Basic setup L Main speakers R Power amp Rhythm machine -,-,,гт^»7Р.,^|.^.С?т,гг аааввевва'в' <=> вэ '& Sb cs & a ‘fis- *&• tb OUT Tape deck ш- IN YAMAHA= Mjioo ; YAMAHA CORPORATION f \AA 5TER 0 JT—ч AUX SEND / ATTENTION RISQUE NE PAS OUVRlR WARNING TO REDUCE THE RISK Or FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE COMPLIES WITH THE LIMITS FOR A CLASS B COMPUTING DEVICE PURSUANT TO SUBPART J OF PART 15 OF FCC RULES :lectrique ("LINE OUT Record players OUT L. R □ Tape deck Tuner OUT L, R OUT L, R Mi Iji 1П111îî m 1 I c—* ' o| 1—in—1 1 1 1 ~'Т I Г T J ^ =31 1 I = = = □□□= ©© CD player 7 • Using the built-in delay unit Control panel Rear panel AUX SEND -AUX RTN” CD TAPE В © © PHONO AUX CD TAPE Stereo headphones MJM10 (Option) Dynamic mic _J -у- One or the other Using an external effect unit External effect unit at VAMAHA SVkJlOO Vu. p; O Ö o o O " Ô o rM Stereo headphones Dynamic mic Using the MJ100 as a submixer IN □ © ;e@3E03c|::::c OUT L OUT R YAMAHA S i YAMAHA CORPORATION h ATTENTION hi -MASTER OUT-^ AUX I® I® 120V 13W 60Hz - YAMAHA CORPORATION MADE IN JAPAN SER NO I”* n J OFF caution u • *1 | RISK OF ELECTRIC SHOCK t DO NOT OPEN -MASTER OUT- ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE COMPLIES WITH THE LIMITS FOR A CLASS B COMPUTING DEVICE PURSUANT TO SUBPART J OF PART 15 OF FCC RULES -LINE OUT—\ O © © © © © LINE IN iL R I is ra DB mmm MAIN MIXER BLOCK DIAGRAM 10 INPUT/OUTPUT SPECIFICATIONS FREQUENCY RESPONSE + 0, — 3dB 20Hz ~ 20kHz TOTAL HARMONIC DISTORTION (20Hz ~ 20kHz) Less than 0.1% HUM & NOISE (20Hz ~ 20kHz) Rs = 150 ohms STEREO OUT Master fader and MIC fader at Maximum level -122 dB (EIN) -88 dB CROSSTALK (1kHz) Adjacent Input Input to Output -60 dB -60 dB MAXIMUM VOLTAGE GAIN PHONO IN to MASTER OUT PHONO IN to STEREO OUT AUX RETURN to STEREO OUT PHONO IN to AUX SEND INST IN to AUX SEND 44 dB 34 dB 10 dB 34 dB 10 dB EQUALIZER (MASTER GEQ) 100, 400, 1K, 3K, 8K 5 BAND + 12 dB Maximum DIGITAL DELAY SHORT MID LONG 3 Positions (100ms) (150ms) (200ms) POWER REQUIREMENTS (US & Canadian models) (General model) AC 120V, 60Hz AC220, 240V, 50/60HZ POWER CONSUMPTION 13 W DIMENSIONS (Wx H x D) 350 x 77 x 254 mm (13-3/4” x 3-1/4” x 10”) WEIGHT 2.8 kg (6.2 Ib) Hum & Noise are measured with 6dB/octave filter at 12.7kHz: equivalent to a 20kHz filter with infinite dB/octave attenuation. ** OdB is referenced to 0.775V rms. 11 INPUT CHARACTERISTICS Connection Actual Load Impedance For Use With Nomi...