Оценок - 2, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
A setup dialog of LS9 Editor is displayed. NOTE When using Windows Vista /7, if the “Use Account Control” window appears, click [Continue] or [Yes]. 2 Follow the on-screen instructions to install the software. NOTE For specific instructions on using the software, refer to the PDF manual from the [HELP] menu in each program. Driver Installation To operate the LS9 from your computer via Ethernet, you’ll need to install the DME-N Network Driver software or the Network-MIDI Driver software. You’ll also need to set up DME-N Network Driver or Network-MIDI Driver after installation. For details, refer to the “DME-N Network Driver Installation Guide for LS9” or the “Network-MIDI Driver Installation Guide.” You’ll refer to “Network Settings” for the set values of LS9 and your computer (page 6.) DME-N Network Driver and Network-MIDI Driver are software that transfers MIDI data back and forth between your computer and the LS9 via Ethernet cable. Connect the computer to the LS9 by using an Ethernet cable via a network switch. When you connect the computer to the LS9 directly, you can use either a crossover or straight cable. Editor Driver Computer Ethernet cable Ethernet cable Network switch or Ethernet cable LS9 You can download the latest version of DME-N Network Driver and Network-MIDI Driver at the following website. For specific installation instructions, refer to the installation guide. LS9 Editor Installation Guide Network Settings When you connect the computer to the LS9 directly • Settings of the LS9 You can use the following initial settings. IP address 192.168.0.128 Gateway address 192.168.0.1 Subnet mask 255.255.255.0 • Settings of the computer We recommend that you make the following settings. IP address 192.168.0.3 Subnet mask 255.255.255.0 Default gateway (Router) 192.168.0.1 When you connect the computer to the LS9 via LAN Make the network settings of the LS9 and your computer in accordance with your LAN. Please contact your network administrator for further detail. Also, please refer to “Caution for connecting LS9 to LAN” in the “Technical Documents” section on the following web site: • Settings of the LS9 IP address Sets the IP address so that it does not conflict with the IP address of any other device on the network. Gateway address Set the IP address of the gateway when the gateway exists. Set the vacant address when the gateway does not exist. The address should be set in the same subnet as IP address within LAN in which the subnet is set. Subnet mask Set the subnet mask of the subnet connected to the LS9. LS9 Editor Installation Guide LS9 Editor Installation Guide 7 Overview of Studio Manager Studio Manager is a cross-platform application that enables you use multiple Editor programs for remotely controlling Yamaha hardware from your computer, and allows you to save the Editor settings for instant recall. The settings of each Editor can be saved and recalled together from Studio Manager. In other words, you can change the settings of your entire system in a single operation by recalling the settings for multiple devices from Studio Manager. This capability is referred to as “Recall.” When you want to save setting files, you can do this from Studio Manager to recall multiple devices at once, or from an individual Editor to recall only a specific device. Getting Started PM5D V2 LS9 Studio Manager M7CL V3 Open an Editor from Studio Manager PM5DV2 Editor M7CL V3 Editor LS9 Editor Synchronize Synchronize Synchronize Starting and setting up Studio Manage r You’ll need to perform the following setup in order to use the Editors in Studio Manager. 1 Start up Studio Manager. For Windows: Click the [Start] button, place your mouse cursor over [Programs (All Programs)] . [YAMAHA Studio Manager], then click [Studio Manager]. For Mac OS X: Select and open the “Applications” folder, the “YAMAHA” folder, then the “StudioManager” folder, then double- click “SM2.” 2 Set up Studio Manager. For details, refer to the PDF manual, found in the [Help] menu on the Studio Manager. NOTE On the Macintosh, do not execute the Studio Manager via Rosetta. The LS9 Editor cannot be added to the Studio Manager via Rosetta. 3 Start up each Editor. In the Studio Manager window, double-click the icon for each Editor. Studio Manager window 4 Set up each Editor. For details, refer to the PDF manual, found in the [Help] menu on each Editor. 5 Synchronize each Editor with your mixing console. For details, refer to the PDF manual, found in the [Help] menu on each Editor. LS9 Editor Installation Guide Uninstall (removing the installed application) To remove the installed Editors and Studio Manager if using Windows: When using Windows Vista / 7 Select [Start] . [Control Panel] . [Programs and Features] or [Uninstall a program], then select the application to be removed and click [Uninstall/Change]. Follow the on-screen instructions to unistall the application....
Эта инструкция также подходит к моделям:Музыкальные инструменты - LS9-32 (623.45 kb)