Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
2 3 4 Select a block layout using the or keys. 4 5 6 5 Press the or key. The Style screen is displayed. Using Auto-Format Layouts 7 8 9 41 EDITING A LABEL 6 Select an attribute using the or keys, and then set a value for that attribute using the or keys. Press the key to set the selected attribute to the default value. 7 Press the or key. The block layout text entry screen is displayed. Caps mode can be used when entering text. 8 Enter text and then press the or key. Repeat for each text field. After all text fields are completed, press the or key to display the print menu. 9 Select "Print" using the or keys and then press the or to print the label. • Select "Edit" to change the text data or style settings. • Select "Save" to store the label in a file memory. • Select "Quit" to exit the Auto-Format function. • Select "Change Layout" to use a different layout. • Press the key to return to the previous step. • Refer to the Block Layouts table on page 43 for a list of all available layouts. • The “Clear All Text?” message is displayed when the key is pressed. Press the or key to delete all text, or press the key to not delete the text. • To print multiple copies, sequentially numbered copies, or a mirror image of the label, with the print menu displayed hold down the key and press the key to display the Print Options menu. • If the width of the current tape cassette does not match the set width for the selected layout, an error message is displayed when you try to print the label. Press the key or any other key to clear the error message, and insert a tape cassette of the correct width. • If the number of characters entered exceeds the limit, an error message is displayed when tthe or key is pressed. Press the key or any other key to clear the error message, and edit the text using fewer characters. • When using the Auto-Format function the label is cut with a margin on the left and right ends regardless of the current Tape Cutting Option setting (refer to page 53). 42 Using Auto-Format Layouts ..Block Layouts• Attribute Value Details 2LineA 2LineB 3Line Block layout (3/4" [18 mm] tape) 1+2LineA 1+2LineB 1+3Line 1+4Line 1+5Line 2LineA Block layout (1/2" [12 mm] tape) 2LineB 3Line 1+2Line .. EDITING A 1 2 3 4 5 6 7 8 9 Using Auto-Format Layouts 43 EDITING A LABEL Attribute Value Details 2LineA Block layout (3/8" [9 mm] tape) 2LineB 1+2Line Block layout (1/4" [6 mm] tape) 1+2Line 44 Using Auto-Format Layouts Creating a Bar Code Label .. EDITING A Using the Bar Code function you can create labels with one dimensional bar codes for use with cash registers, stock control systems or other bar code reader systems, or even asset control tags used in an asset management system. • The P-touch labeler is not designed exclusively for creating bar code labels. Always check that bar code labels can be read by the bar code reader. • For best results, print bar code labels in black ink on white tape. Some bar code readers may not be able to read bar code labels created using colored tape or ink. • Use the “Large” setting for “Width” whenever possible. Some bar code readers may not be able to read bar code labels created using the “Small” setting. • Continuously printing a large number of labels with bar codes can overheat the print head, which may effect printing quality. Setting Bar Code Parameters 1 Press the key to display the Setup menu, select “Bar Code Setup” using the or keys, and then press the or key. The Bar Code Setup screen is displayed. Pressing key while holding down key will also allow you to go to "Bar Code Setup". 2 Select an attribute using the or keys, and then set a value for that attribute using the or keys. The "C-Digit" (Check Digit) attribute is only available for the CODE39, I-2/5 and CODABAR protocols. Characters may not appear below the bar code even when "On" is selected for "Under #", depending on the tape width being used, the number of lines entered, or the current character style settings. 1 2 3 4 5 6 3 Press the or key to apply the settings. New settings are NOT applied if you do not press the or key. 7 • Press the key to return to the previous step. • Press the key to set the selected attribute to the default value. • Refer to the Bar Code Settings table on page 46 for a list of all available settings. Creating a Bar Code Label 8 9 45 EDITING A LABEL ..Bar Code Settings• Attribute Value Protocol CODE39, CODE128, EAN8, EAN13, EAN128, UPC-A, UPC-E, I-2/5 (ITF), CODABAR Width Large Small Under# (characters printed below bar code) On Off C.Digit (check digit) Off On (only available for the CODE39, I-2/5 and CODABAR protocols) Entering Bar Code Data 1 Press the key. The Bar Code Input screen is displayed. Up to five bar codes can be entered on a label. 2 Type in the bar code data. Special characters can be entered in the bar code when using the CODE39, CODABAR, CODE128 or EAN128 protocols. When not using special characters, go to step 5. 3 Press the key. A list of characters available for the curr...
Эта инструкция также подходит к моделям:Торговое оборудование - PT-2100 (8.63 mb)