Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
If you have not set the password, click [OK]. The “Welcome to the YAMAHA USBMIDI Driver Installer” window is displayed. The “Select a Destination” is displayed. 7 Select a destination for the driver installation, then click [Continue]. A window opens, displaying the message “Click install to perform a basic installation of this software.” The message “Installing this software requires 100MB of disk space” may appear. However, the actual required free disk space is specified in the “Macintosh System Requirements” on page 6. 8 Click [Install]. If the driver has already been installed, the [Upgrade] button is displayed instead of the [Install] button. The driver is installed, and message “The software was successfully installed” is displayed. 9 Click the [Close] button. The driver installation is complete. You can check the following locations to confirm that the driver has been installed: • Library -> Audio -> MIDI Drivers -> YAMAHA- USBMIDIDriver.plugin • Library -> PreferencePanes -> YAMAHAUSBMIDIPatch. prefPane 10 Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) Installing an Editor Installing an Editor 1 Double-click the “Mac OS X” folder on the CDROM. 2 Double-click the “SM_” folder. 3 Double-click the folder for the mixing console you’re using (for the DM2000, this is “DM2K_”). 4 Double-click “Install xxxxx_Editor” (“xxxxx” represents the name of the console). 5 Follow the on-screen instructions to install an Editor that supports your console. Installing Studio Manager After you install an Editor, install Studio Manager. NOTE: If you install an Editor and Studio Manager that support another device, an older version of Studio Manager may be installed and Studio Manager may not operate correctly. In this case, install the correct version of Studio Manager from this CD-ROM, or download the latest version of Studio Manager from the Yamaha website. 1 Double-click the “Mac OS X” folder on the CDROM. 2 Double-click the “SM_” folder. 3 Double-click the “SM2_” folder. 4 Double-click “Install Studio Manager.” 5 Follow the on-screen instructions to install Studio Manager. Installing Card Filer (DM2000 only) 1 Double-click the “Mac OS 9” folder on the CDROM. 2 Double-click the “Card_” folder on the CD-ROM. 3 Double-click “Install Card Filer.” 4 Follow the on-screen instructions to install the software. For information on using Card Filer, see the “CardFilerManual.pdf.” This file is installed in the same folder as Card Filer. Setting Up OMS The “OMS Setup for YAMAHA” folder on the included CD-ROM contains OMS studio setup files preconfigured for use with your Yamaha mixing console. 1 Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. If you are connecting to the SERIAL TO HOST port, use a serial cable to connect to the Printer or Modem port on your computer. 2 Turn on your Yamaha mixing console. 3 Start your Macintosh, and then insert the included CD-ROM into your computer’s CD-ROM drive. 4 Double-click the “Mac OS 9” folder on the CDROM. 5 Double-click the “OMS_” folder on the CD-ROM. 6 Double-click the “OMS Setup for YAMAHA” folder. This folder contains the following OMS studio setup files: • ****-USB • ****-Modem • ****-Printer (**** will be the model name) 7 Copy the appropriate file to your computer’s hard disk, and then double-click it. NOTE: If the AppleTalk dialog box appears, click the [Turn It Off] button, and then click [OK] on the subsequent dialog box. OMS Setup starts and the “Studio Setup file” window appears. 8 Choose [Make Current] from the [File] menu, and then save the setup. NOTE: If the console is connected to the computer’s Modem or Printer port, from the [Edit] menu select [Preferences], then select “Use Apple SerialDMA driver when available.” After completing the above setup, your Yamaha mixing console will be the only MIDI device in the current OMS studio setup. In order to use other MIDI devices, or to add an additional Yamaha mixing console, you must create a new studio setup. See the “OMS_2.3_Mac.pdf” for more information. ENGLISH Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 11 Getting Started Overview of Studio Manager Studio Manager is a cross-platform application that enables you to start multiple Editors that control YAMAHA hardware products remotely, and to save multiple Editor settings. You can run Studio Manager as a stand-alone application, or as a plug-in within supported DAW (digital audio workstation) / sequencer applications, such as Cubase SX 3.0.1 or later. In either case, the basic functionality is the same. For the latest information on compatible DAW applications, refer to the following website. Hardware products Open an editor from Studio Manager Synchronize DM2000 Editor application DM1000 SPX2000 DM2000 Studio Manager Open from a compatible DAW application Start up Studio Manager in stand-alone form DM1000 Editor appli...