Оценок - 3, средний балл: 3.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
.............. For further information on connecting other components, see pages 14 to 20 in the Owner’s Manual. QUICK REFERENCE GUIDE C2006 All rights reserved. Decide where to install this unit. Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner. Connecting external components to this unit Installing this unit When installing this unit under your TV, place it in a TV cabinet as shown below. Make sure that the cabinet is large enough to allow adequate ventilation space around this unit. To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor. When installing this unit above your TV, place it on the top panel of a commercially available rack as shown below. Make sure that the top panel of the rack is wide and stable enough to support the weight of this unit. This quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner’s Manual. Install this unit either above or under your TV. Please read the following for reference. For further information on installation, see pages 11 to 13 in the Owner’s Manual. Make sure you use the supplied fasteners to prevent an accidental fall of this unit (see page 13 in the Owner’s Manual). Install this unit in the exact center of the wall when it is measured from the left and right corners. Install this unit in the corner at a 40° to 50° angle from the adjacent walls. 40° to 50° An object, such as furniture An object, such as furniture More than 1.8 m (6.0 ft) Within 1 m (3.3 ft) upper or lower from the center Optimizer microphone Cardboard microphone stand Sofa Place the optimizer microphone on the extended center line of this unit and 1.8 m (6.0 ft) or more away from it. Also, make sure place the optimizer microphone within 1 m (3.3 ft) upper or lower from the center height of this unit. Optimizer microphone Center line Setting up the listening environment automatically Connect the optimizer microphone to this unit. You can automatically adjust the various channel settings that best match your listening environment using the supplied optimizer microphone. Follow the procedure below to connect the optimizer microphone to this unit and place it in a proper location. Set the optimizer microphone at your normal listening position. Use the supplied cardboard microphone stand or a tripod to place the optimizer microphone at the same height as your ears would be when you are seated. .................... .......................... .......... .................... .......................... Assemble the cardboard microphone stand and place the optimizer microphone on the top of the stand. Optimizer microphone (supplied) Cardboard microphone stand (supplied) If you have set the optimizer microphone, follow the steps on the backside to start the AUTO SETUP procedure. Continued on the back Connect the optimizer microphone to the OPTIMIZER MIC jack on the front panel. Printed in Malaysia WH90310 Coaxial digital output Optical digital output Analog audio output 1 2 L R Video output Video input VCR SUBWOOFER TV/STB AUDIO INPUT OUT OPTICAL DIGITAL INPUT TV/STB VIDEO AUX DVD COAXIAL Monaural input TV DVD player This unit To the AC outlet Subwoofer y If a subwoofer is connected to this unit, turn on the power of your subwoofer and then carry out the AUTO SETUP procedure (see the backside) or select “SWFR” for “BASS OUT” in “SUBWOOFER SET” (see page 63 in the Owner’s Manual). Cables used for connections Connect cables in the following order. 1 Audio pin cable (supplied) 2 Optical cable (supplied) 3 OSD (On-Screen Display) video pin cable (supplied) 4 Digital audio pin cable (supplied) 5 DVD video pin cable 6 Subwoofer pin cable (in case you connect a subwoofer) 1 2 3 4 5 6 ..Do not plug the power supply cable into a wall outlet until all connections are complete. ..Unplug the power supply cable before changing connections, moving or cleaning this unit. .............. English Check the following points. ..Is the optimizer microphone firmly connected to this unit? ..Is the optimizer microphone placed in a proper loacation? ..Are there any large obstacles in between the optimizer microphone and the walls in your listening room? ..The AUTO SETUP procedure starts in 10 seconds after pressing ENTER on step 7. To achieve the best results possible, evacuate yourself for your listening room until the AUTO SETUP procedure is completed. ..To cancel the AUTO SETUP procedure after it is started, press RETURN. ..The AUTO SETUP procedure takes about 3 minutes. Press ENTER to start the AUTO SETUP procedure. The following screen appears on the TV and the AUTO SETUP procedure starts in 10 seconds. The setup screen automatically changes during the AUTO SETUP pr...