Оценок - 2, средний балл: 3
(
)
)
|
Фото и характеристики Yamaha YSP-900 |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Signals input from 2-channel sources are played back on multiple channels. For more information on surround modes, see page 42. SURROUND 6 or SURROUND 1 Select the TV channel you want to watch. To select a TV channel, use the remote control supplied with your TV. ENTER 6 2 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 3 Press TV on the remote control. This unit outputs audio signals from your TV. TV 4 If you hear sound from your TV speakers, reduce the volume level of your TV until you can no longer hear any audio being output. To reduce the TV volume level, use the remote control supplied with your TV. 44 En ENJOYING SURROUND SOUND Adjusting surround mode parameters You can configure the parameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect. STEREO MY BEAM 21 CH LEVEL MENU RETURNTEST ENTER SURROUND OFF SPORTS 3 4 5 6 7 8 9 0 +10 5BEAM ST+3BEAM 3BEAM MUSIC MOVIE YSP TV/AV 1 Repeat steps 1 and 2 in “Enjoying 2-channel sources in surround sound” on page 43 and select PL II Music or Neo:6 Music. 2 Press / to select the parameter. ENTER ¦ When Dolby Pro Logic II Music is selected PANORAMA Gives front left and right channel sound a wraparound effect, distributed throughout the entire surround sound field to give you an expansive feeling. Choices: ON/OFF Default setting: OFF DIMENSION Adjusts the difference in volume between front and surround channels to the volume balance you desire. Control range: –3 (toward the surround direction) to +3 (toward the front direction) Default setting: STD CT WIDTH Distributes the center channel sound to the left and right. If set to 0, center channel sounds output only from the center channel. Control range: 0 to 7 Default setting: 3 ¦ When DTS Neo:6 Music is selected C. IMAGE Adjusts the center image from three channels (front and center) to varying degrees. Control range: 0.0 (wider) to 1.0 (toward the center) Default setting: 0.3 BASIC OPERATION 3 Press / to configure the parameter. ENTER English 45 En ENJOYING STEREO SOUND ENJOYING STEREO SOUND Stereo playback You can enjoy 2-channel stereo playback by changing the beam mode to the stereo playback using the beam mode buttons on the remote control. The normal sounds are output from the front and left channels in the 2-channel stereo. This is ideal for playing back hi-fi sources, such as CDs, and can be used to replace your TV speakers. STEREO MY BEAM 21 SLEEP CH LEVEL MENU RETURNTEST SURROUND OFF SPORTS 3 4 5 6 7 8 9 0 +10 5BEAM ST+3BEAM 3BEAM MUSIC MOVIE VOL MODE AUTO SETUP INPUTMODE YSP TV/AV ENTER 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press STEREO on the remote control to select the stereo playback as a beam mode. STEREO Notes • When you play back multi-channel sources, all signals except those for the front left and right channels are mixed down and output from the front left and right channels. No audio is output from the center and rear channels. • The surround mode becomes disabled when the stereo playback is selected as the beam mode. • When you play back Dolby Digital audio signals in the stereo playback, the dynamic range becomes compressed. If the volume level decreases to the extreme, use other beam modes except the my beam. • If the stereo playback is selected as the beam mode, the surround modes (see page 42) and the CINEMA DSP programs (see page 50) become ineffective. 4 46 En PLAYING BACK SOUND CLEARLY (My beam) PLAYING BACK SOUND CLEARLY (My beam) You can improve listenability in a noisy environment by changing the beam mode to the my beam, outputs sound beams directly to the listening position in a single channel. In addition, the my beam is also ideal if you do not want the sound beams to be reflected on the walls in your listening room or if you do not disturb others asleep while enjoying music or movies at night. My beam microphone POWER POWER STANDBY/ON TVAV STEREO MY BEAM 21 CH LEVEL MENU RETURNTEST ENTER SURROUND OFF SPORTS 3 4 5 6 7 8 9 0 +10 5BEAM ST+3BEAM 3BEAM MUSIC MOVIE YSP TV/AV Note If the my beam is selected as the beam mode, the surround modes (see page 42), the CINEMA DSP programs (see page 49) and the TruBass (see page 54) become ineffective. In addition, no audio is output from the subwoofer connected to this unit. Using auto-adjust function The my beam microphone on the remote control collects the test tones from this unit, and then the beam angle is automatically adjusted. 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press and hold MY BEAM on the remote control more than 2 seconds. A test tone is output twice from this unit. Keep pointing the remote control toward this unit during the test tones are being output so that the my beam microphone can collect the test tones. Control range: L50° to R50° Operation guarantee range: 6 m, L30° to R30° MY BEAM Notes • If an error occurs, an er...