Оценок - 5, средний балл: 3.4
(
)
)
|
Фрагмент инструкции
SHUTTLE 32 0/- TAP CLEAR SNAPSHOT ASSIGN KNOB / FDR NUMERICS 5 6 1 4 987LOCATOR JUMP PREVIOUS NEXT SCENE AUTOMIX REC RESTART STORE ZERO STOP PLAY REC PROJECT END PROJECT TOP SCRUB EXT SYNC TO THRU FROM PREVIEW BANK AUX 7 AUX 8 USER AUX 4 AUX 5 AUX 6 AUX 1-8 AUX 1 AUX 2 AUX 3 BANK SHIFT MARKER YES NO ENTER EXIT ZOOMLOCATOR / MARKER / SCENE TIME / VALUE / / SHUT / EJECT + + 1,7 2 3 4,5 6 1. Press [STOP]. 2. Press [SCENE]. [SCENE] indicator will light. 3. Hold [SHIFT] and press [BANK (SCENE)]. The numerics buttons ([0]–[9]) will blink (current BANK number will light). 4. Press the numerics buttons ([0]–[9]) to select the scene bank. For this example, press [0]. Select the scene bank 0. Buttons [0]–[9] will light to indicate the scenes that are registered in scene bank 0. 5. Of the [0]–[9] buttons, press any that has a lighted indicator. The scene will be recalled, and the settings of the VS-2480/2480CD will change. 6. Press [PLAY]. The project will playback. Notice that the arrangement of the demo performance is different. 7. Press [STOP]. Playback will stop. 8. Repeat step 2–7 to hear and compare various arrangements of the demo performance. Since there are ten scene banks (0–9), and each of them holds ten scenes, numbered from 0 to 9, a total of 100 scenes can be registered. If [SCENE] indicator is already lighted, you may skip steps 2. If scene bank number 0 is already selected, you may skip steps 3–4. To delete a previously registered scene, press [CLEAR] and then a previously registered [0]– [9] button (i.e., one whose indicator is lit). Scenes are registered for numeric keys that are lit. Please stop playback before you switch scenes. 31 Making Making a Multi-Track Recording Recording operations cannot be performed when the demo performance or protected project (Project Protect (Owner’s Manual p. 75)) is selected. This is because the is protected so that its contents cannot be modified. In order to record, use the following procedure to prepare a new project. This is analogous to putting a new tape into a tape-type multi-track recorder. Zip drive (Appendices p. 14) Regarding Hard Disk Partition Size When purchased, the hard disk (HDP35 series) is divided (partitioned) into 10 GB units. You can also select 500 MB, 1 GB, or 2 GB disks that are compatible with the Roland VS series. The changed partition size will take effect when you initialize (Initializing a drive (Owner’s Manual p. 84)) the hard disk. For example, if you change the partition size before you begin the procedures (multitrack recording) described in this chapter, you will be able to record for a longer time. However, all contents saved on the hard disk will be lost, and cannot be recovered. As necessary, please back up (Owner’s Manual p. 80) the your works beforehand on a external removable disk or CD-RW disc. ROUTING EZ MENU TRACK EDIT COPY MOVE INSERT CUT ERASE COMP / EXP. IMPORT LOOPA.PUNCH TO OUTIN FROM WAVE DISP REDO UNDO PROJECT TRACK EFFECT UTILITY COPY MOVE TRIM IN TRIM OUT DELETE SPLIT NEW AUTOMIX REGION PHRASE CD-RW MASTERING AUTOMIX ZOOM GRADATION MIDI DISK/ TIME / VALUE PATCH BAY + + PAGE F1 F2 F3 F4 F5 F6 HOME DISPLAY 4 5 1 2 3 987LOCATOR SCENE BANK AUX 7 AUX 8 USER BANK LOCATOR / MARKER / SCENE The HDP35 series cannot be used in the earlier VS models (VS-880/880EX/890/1680/ 1880/1824/1824CD, and VSR-880). About the number of tracks available for simultaneous recording and playback (Owner’s Manual p. 14). 31 Making Making a Multi-Track Recording Recording operations cannot be performed when the demo performance or protected project (Project Protect (Owner’s Manual p. 75)) is selected. This is because the is protected so that its contents cannot be modified. In order to record, use the following procedure to prepare a new project. This is analogous to putting a new tape into a tape-type multi-track recorder. Zip drive (Appendices p. 14) Regarding Hard Disk Partition Size When purchased, the hard disk (HDP35 series) is divided (partitioned) into 10 GB units. You can also select 500 MB, 1 GB, or 2 GB disks that are compatible with the Roland VS series. The changed partition size will take effect when you initialize (Initializing a drive (Owner’s Manual p. 84)) the hard disk. For example, if you change the partition size before you begin the procedures (multitrack recording) described in this chapter, you will be able to record for a longer time. However, all contents saved on the hard disk will be lost, and cannot be recovered. As necessary, please back up (Owner’s Manual p. 80) the your works beforehand on a external removable disk or CD-RW disc. ROUTING EZ MENU TRACK EDIT COPY MOVE INSERT CUT ERASE COMP / EXP. IMPORT LOOPA.PUNCH TO OUTIN FROM WAVE DISP REDO UNDO PROJECT TRACK EFFECT UTILITY COPY MOVE TRIM IN TRIM OUT DELETE SPLIT NEW AUTOMIX REGION PHRASE CD-RW MASTERING AUTOMIX ZOOM GRADATION MIDI DISK/ TIME / VALUE PATCH BAY + + PAGE F1 F2 F3 F4 F5 F6 HOME DISPLAY 4 5 1 2 3 987LOCATOR SCENE BANK AUX 7 AUX 8 USER BANK LOCATOR /...