Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
• If “--.--” appears instead of the total playing time during programming, this means: – you have programmed a track number which exceeds 20 – the total playing time has exceeded 100 minutes. The Tape Deck The Tape Deck Recording on a tape manually You can record from CD, tape, or radio as you like. For example, you can record just the songs you want or record from the middle of the tape. The recording level is adjusted automatically. 1/u 2 (power) – + 0g ) +– + 1 2 3 4 5 ¤ ¤ a » a . a . . DOLBY NR » . 13,54 1 Insert a recordable tape into deck B. 2 Press one of the function buttons you want to record (e.g., CD). 3 Press REC PAUSE/START. Deck B stands by for recording. a(for front side) lights up. 4 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 5 Press REC PAUSE/START. Recording starts. 6 Start playing the source to be recorded. To Press Stop recording .on the deck B Pause recording REC PAUSE/START Tips • If you want to record from the reverse side, press »so that »(for reverse side) lights up. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” lights up after pressing REC PAUSE/START in step 3. • When recording from a CD, you can use the jog dial to select tracks during recording pause mode (after pressing REC PAUSE/START in step 3 and before pressing again in step 5). Note Dolby NR is off and DIRECTION (Aor RELAY) is §when the mains AC power supply is switched off. Recording a CD by specifying track order — Programme Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. 1 Place a CD and insert a recordable tape into deck B. 2 Press CD. 3 Press PLAY MODE repeatedly until “PROGRAM” appears in the display. 1/u EDIT 4 Press one of the DISC 1~5 buttons to select a CD. – + 0g ) +– + 1 2 3 4 5 ¤ ¤ a . . » a . » a . (power) 2310118 14 5 6 12 5 Turn the jog dial until the desired track appears in the display. Disc number Track number 6 Press ENTER. The track is programmed. The last programmed track number and the total programmed track number appear, followed by the total playing time. Total playing time 3 PROGRAM PROGRAM The last programmed track 7 To programme additional tracks to DOLBY NR be recorded on side A, repeat steps 4 to 6. Skip step 4 to select tracks from the same disc. continued Recording a CD by specifying track order (continued) 8 Press .(Pon the remote) to insert a pause at the end of side A. “P” appears in the display and the total playing time resets to “0.00” in the display. 9 Repeat steps 5 and 6 for tracks from the same disc or steps 4 to 6 for tracks from another disc to programme the remaining tracks to be recorded on side B. 10 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback. · (for front side) lights up. 11 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 12 Press REC PAUSE/START. Recording starts. To stop recording Press .on the deck B or on the CD player. To check the order Press CHECK on the remote repeatedly. After the last track, “CHECK END” appears. To cancel Programme Edit Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. Tip When you want to reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears after pressing CD SYNC. Selecting tape length automatically — Tape Select Edit You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing more than 20 tracks. 1 Insert a CD. 2 Press CD. 3 Press EDIT (EDIT/PTY on European model) once so that “EDIT” flashes. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively. Notes • You cannot use this function after programming. In order to use this function, you must first cancel the programme by pressing PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. • This function does not work when the total playing time of the CD is shorter than 1 minute. • Dolby NR is off and DIRECTION (Aor RELAY) is §when the mains AC power supply is switched off. Sound Adjustment Adjusting the sound You can reinforce the bass, create a more powerful sound, and listen with headphones. 1/u (power) DBFB – 0g + ) +– + GROOVEPHONES To reinforce bass (DBFB) Press DBFB*. Every time you press the button, the display changes as follows: nDBFB NORMAL ( DBFB ) µ DBFB HIGH ( DBFB ) µ DBFB OFF (off) * DBFB = Dynamic Bass Feedback For a powerful sound (GROOVE) Press GROOVE. The volume switches to power mode, DBFB is automatically set to full strength, the equalizer curve changes, and GROOVE button lights up. Press GROOVE again to return to the previous volume. Notes • With some songs, the music wi...