Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
In these cases, they’re arranged over several “pages” on the display.You’ll see the Page symbol in the lower left-hand corner of the display—the display may also show what look like folder tabs, presenting the available pages as tabbed layers. Tabs Press the PAGE button repeatedly to display each of the available pages. If you’ve connected an ASCII keyboard to the VS-2000, you can press its Tab key instead of the VS-2000’s PAGE button. Param 1, 2, 3 Screens In some VS-2000 menus, parameter pages are divided further into sub-pages called “Param1,”“Param2,” etc.You can select one of these sub-pages by pressing its F button. The Time/Value Dial Once you’ve selected a parameter you want to edit, you can turn the large, black Time/Value dial to change the parameter’s value. When you’re adjusting parameter values with the Time/Value dial, hold down SHIFT as you turn the dial to move through the available values by different-sized increments. You can change your current time location in a project using the Time/Value dial (see Page 131). Roland VS-2000 Owner’s Manual 4—Setting Up and Basic Operations The ENTER/YES and EXIT/NO Buttons Use the ENTER/YES or EXIT/NO buttons beneath the Time/Value the to execute or cancel the current operation, or to respond to a question posed on the display. You can tell the ENTER/YES button from the EXIT/NO simply by touch—ENTER/YES is larger. The ENTER/YES and EXIT NO buttons blink to signify that you can press the: • ENTER/YES button to finish, or press EXIT/NO to cancel, the current operation. • ENTER/YES to answer “yes” to a displayed question, or EXIT/NO to reply “no.” The ENTER/YES button also blinks to indicate that you can press it to view additional options. EXIT/NO flashes at times to show you can press it to exit the current screen. If you prefer, you can always use the Enter key on your keyboard instead of ENTER/ YES, or the Esc key instead of EXIT/NO. The SHIFT Button Primary Many of the VS-2000’s buttons perform more than one job—these function buttons often have an upper label and a lower label that’s printed Secondary inside an outline box.The un-boxed label shows the button’s function primary function, the boxed label its secondary use. To cause a button to perform its secondary job, hold down SHIFT and press the button before letting go SHIFT. You can set the SHIFT button so that it toggles on and off with each touch to cut down on SHIFT-button presses. See “SHIFT LOCK” on Page 379. MUTE+ = For a complete list of SHIFT operations, see Page 399. Using a Mouse When you’ve installed a VS20-VGA VGA/Mouse Expansion Board, the VS-2000 works with a two-button mouse, which can be set up for right-handed or left-handed users, according to the setting of the MOUSE BUTTON SWAP Sw System parameter in the VS-2000’s UTILITY menu. When the parameter’s turned: • off—the mouse operates as a right-handed mouse.The left button clicks and the right button displays pop-up menus. • on—the mouse operates as a left-handed mouse.The right button clicks and the left button displays pop-up menus. When the Owner’s Manual says to “click” the mouse, right-handed users should click the left-hand button.When it says to “right-click,” they should click the right-hand button. If you’re a left-handed mouse user, you’ll need to mentally reverse these instructions—”click” the right-hand button and “right-click” the left-hand button. Roland VS-2000 Owner’s Manual 4—Setting Up and Basic Operations Mouse Cursors The cursor changes to show you what the mouse can do as you move it over different items on the display. This cursor: Means that the mouse: is moving between items on the display. On the Home screen, you can click on a track to select it. can click on the item beneath the cursor. If it’s a switch, you can toggle through its values by repeatedly clicking. If it’s an adjustable parameter, you’ll see either of the next two cursors after you click. can raise or lower the parameter’s value as you drag the mouse up or down, respectively. can raise or lower a parameter’s value as you drag the mouse right or left, respectively. can drag the data beneath it during editing operations. is ready to move whatever’s beneath the mouse to a new location. is ready to copy whatever’s beneath the mouse by dragging; this appears when SHIFT is held down during track editing. is ready to trim the start of a phrase during track editing. is ready to trim the end of a phrase during track editing. There are several additional cursors that appear momentarily during track editing, as described on Page 248. When a parameter’s values are presented in a list or in a box, you can simply click the desired value with your mouse without having to select the parameter first. Pop-Up Menus Drag to the When a pop-up menu is available, you can select an item in the desired menu by dragging the mouse to it—so the item’s highlighted— menu item and click. and then click the left mouse button to select it.Th...