Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
The functions appear in the display. 3. Press [F4] (DEL). 4. Rotate the VALUE dial to select the Library number to be deleted. 5. Press [ENTER/YES] two times. 53 ■ SCENE MEMORY Selecting the SCENE BANK while viewing the names 1. Press [BANK]. 2. Rotate the VALUE dial to select a SCENE BANK number. 3. Press [ENTER/YES]. To set a SCENE so that only the specified parameters to be reflected in the mix 1. Press [BANK]. 2. Press [FI] (PREF). 3. Press [ T ] to select "ItemSelect." 4. Use the [ T ], [ I ], [ <- ], and [ X ] buttons to select the parameters to be reflected in the SCENE recall. 5. Rotate the VALUE dial to place a check mark in the box. Fader — affects the volume settings Pan — affects the pan settings EQ — affects the equalizer settings Routing — affects the input and output routing Send Level — affects the send levels to the effects and AUX Effects — affects the effect settings Compressor — affects the compressor settings To get a SCENE to apply a smooth transition between track volumes when a scene is recalled (fade-in or fade out) 1. Press [BANK], 2. Press [FI] (PREF). 3. Press [ I ] to select "Trans.Speed." 4. Rotate the VALUE dial to set the length of time during which the volume will change in each channel when a SCENE is switched. Naming a BANK 1. Select the BANK to be named (hold down [BANK] and press [SCENE3] or [SCENE4]). 2. Press [BANK]. 3. Press [F1-F4 ON/OFF). The functions appear in the display. 4. Press [FI] (NAME). 5. Use the [ <— ] and [ -» ] buttons and the VALUE dial to set the Name. * By pressing IF11 (Ins), you can insert one character at the cursor position; press [F2] (Del) to delete one character at the cursor position. 6. Press [ENTER/YES] two times. Alternatively, you can press [F4] (EXEC) followed by [ENTER/YES], Copying the content of one SCENE to another SCENE 1. Press [BANK], 2. Press [F1-F4 ON/OFF]. The functions appear in the display. 3. Press [F2] (COPY). 4. Press I «— 1 to select "Source." 5. Rotate the VALUE dial to select the copy source BANK/ SCENE number. 6. Press [ -» ] to select "To." 7. Rotate the VALUE dial to select the copy destination BANK/SCENE number. 8. Press [F4] (EXEC) (When the message "Are You SURE?" appears in the display, press [ENTER/YES]). Exchanging the content of one SCENE with that of another SCENE 1. Press [BANK], 2. Press [F1-F4 ON1/OFF]. The functions appear in the display. 3. Press [F3] (SWAP). 4. Press [ <- ] to select "Source." 5. Rotate the VALUE dial to select the swap source BANK/ SCENE number. 6t Press ! —> ] to select "To." 7. Rotate the VALUE dial to select the swap destination BANK/SCENE number. 8. Press [F4] (EXEC), then press [ENTER/YES]. Undoing and redoing a SCENE