Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
* If you save a phrase with the REVERSE button turned on, the state of the button will also be memorized. If you will always want a certain phrase to play back in reverse, you should save it with the REVERSE button turned on. (“Saving a phrase” (p. 29)) * If you overdub onto a phrase that plays back in reverse, the sound you’ve overdubbed is recorded as being for normal playback. * When you switch to reverse playback while playback is in progress, the phrase begins to play in the opposite direction, starting from the point in the loop that maintains the loop's duration. This allows you to switch to reverse playback at any point in the phrase you like without changing the duration of the loop. Example: When you switch to reverse playback one measure from the start of the phrase, reverse playback then starts one measure from the end of the phrase. * You cannot switch to Reverse Playback under the following conditions. • While phrases are being switched (while the PLAY indicator is flashing) • While changing the tempo (while the LOOP PHRASE or ONE SHOT PHRASE indicator is flashing) You can also control reverse playback by using the pedal switch instead of the REVERSE button. Connect a pedal switch such as the FS-5U (sold separately) to the REVERSE jack (p. 9). * Pedal switches made by some other manufacturer may operate in the opposite way. Such pedal switches cannot be used. * If you are using the FS-5U, move the polarity switch toward the jack. * The FS-5L cannot be used. MEMO Saving or deleting a phrase Saving or deleting a phrase The memory of the RC-20XL is divided into two areas: phrase tracks 1–11 and temporary memory. 12 10 11 ••••••••3 9 Record/ Overdubbing Play Memory Save Phrase tracks Temporary memory A phrase that you record or overdub is first stored in temporary memory. The phrase stored in temporary memory is temporary, and will be erased when the following operations occur. • When you turn off the power • When you select a different phrase track Before you perform any of these operations, make sure to save the phrase in a phrase track if you wish to keep it (p. 29). If the overdubbing produces a phrase that you like, save it to the phrase track before using the next procedure. Once the data is saved to the phrase tracks, it can be called up anytime afterwards. If you wish to erase (clear) only the phrase in temporary memory, press and hold the right pedal for two seconds or longer. What is a phrase track? A phrase track is an area of internal memory in which phrases are stored. Phrases that are saved here will not be lost when the power is turned off. Also, phrases that are saved here can be selected at any time by using the PHRASE SELECT knob. The phrases that can be saved in phrase tracks 1–11 can have a maximum total length of 16 minutes. You can only change the playback tempo (p. 33) of phrases saved to the phrase tracks. To change the playback tempo of a phrase stored in temporary memory...
Эта инструкция также подходит к моделям:Видеонаблюдение - RC-20XL (1.17 mb)