Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
DUAL WATcH Your FR1000 Series has a DUAL WATCH function, to enable user to monitor 2 selected channel/privacy code for any activity. It is similar with the SCAN function but will only monitor 2 channels instead of the whole 22 channels. The first channel/privacy code is the current setting, the second channel/privacy code is the one you will set on the MENU. To turn on the DUAL WATCH function, press the MENU button until the DUAL WATCH icon appear while in the right an “oF” icon appears. Select the second channel by turning the TUNING knob. To select a Privacy Code for the second channel press the MENU button once, and then turn the TUNING knob to select one of the 38 CTCSS Privacy Code or press again the MENU button and turn the TUNING knob to select one of the 83 DCS Privacy Code. Press the MENU or PTT button to confirm. The DUAL WATCH icon will remain on the display. The radio will rapidly scan the two channels selected and stop on any active channel. Your radio will stay on the active channel 1 FR1000 OWNER’S MANUAL OPERATING YOuR RAdIO continued as long as the signal is present and will resume scanning 5 seconds after the signal is no longer present. To turn off the DUAL WATCH function, press the SCAN button. The current GMRS/FRS radio setting will be displayed and the DUAL WATCH icon will disappear on the display. SETTING THE RADIO TO NOAA WEATHER RADIO MODE To set the FR1000 to NOAA WEATHER RADIO mode, move the BAND switch in WX position. The LCD will show the current WX channel setting, and the NOAA WEATHER (WX) BAND icon will appear on the display. Turn the TUNING knob to select one of the 7 NOAA WEATHER (WX) BAND channels. NOAA WEATHER ALERT Your FR1000 has a NOAA WEATHER ALERT function, to enable you to automatically receive weather alert from designated NOAA stations. To turn the NOAA WEATHER (WX) ALERT on, turn the FUNCTION switch to . The NOAA WEATHER (WX) ALERT icon will appear on the display. If the radio receives a WX ALERT signal from a designated NOAA station while on any mode, the radio will beep for 20 seconds while the ALERT icon will blink on the display After which, you can set the BAND switch to WX position to go to NOAA WEATHER RADIO mode to listen to the emergency broadcast. The NOAA WEATHER (WX) ALERT icon will remain blinking on the display when it receives a WX ALERT signal unless the BAND switch is set to WX mode or any button is pressed. This is to remind the user that a WX Alert signal have been received 20 FR1000 OWNER’S MANUAL OPERATING YOuR RAdIO continued in case they missed it. To turn the NOAA WEATHER (WX) ALERT off, move the FUNCTION switch from position to other position. SETTING THE RADIO TO AM/FM REcEIvER MODE To set the FR1000 to AM/FM RECEIVER mode, move the BAND switch in AM or FM position. The LCD will show the current AM or FM channel setting. cHANNEL SELEcTION (AM/FM bAND) Turn the TUNING knob clockwise or counter-clockwise to select the AM or FM frequency. Turning and holding the TUNING knob will make the radio scan for the frequency continuously until it receives a strong signal. SETTING THE RADIO TO cLOck MODE To set the FR1000 to CLOCK mode, just turn the BATTERY SOURCE switch to OFF. The display will show the current time setting. cHANGING THE HOUR SETTING To change the hour setting of the clock, press the SCAN/HOUR button while in CLOCK mode, and the hour digit of the clock will blink. Turn the TUNING knob to change the hour setting. Press the PTT button to confirm. cHANGING THE MINUTE SETTING To change the minute setting of the clock, press the MENU/MINUTE button while in CLOCK mode, and the minute digit of the clock will blink. Turn the TUNING knob to change the hour setting. Press the PTT button to confirm. 21 FR1000 OWNER’S MANUAL OPERATING YOuR RAdIO continued SETTING THE ALARM cLOck The FR1000 can also function as an ALARM CLOCK. To turn the ALARM CLOCK on, press the ALARM ON/OFF button while in CLOCK mode. The ALARM CLOCK icon will appear. To set the hour setting of the ALARM, press the SCAN/HOUR button while in CLOCK mode, and the hour digit of the clock will blink. Turn the TUNING knob to change the hour setting. Press the PTT button to confirm. To set the minute setting of the ALARM, press the MENU/MINUTE button while in CLOCK mode, and the minute digit of the clock will blink. Turn the TUNING knob to change the minute setting. Press the PTT button to confirm. To turn the ALARM CLOCK off, press the ALARM ON/OFF button while in CLOCK mode. The ALARM CLOCK icon will disappear. NOTE: You can only turn on/off the ALARM CLOCK when the radio is in CLOCK mode. The ALARM ON/OFF button will have other function when the radio is in another mode. ALARM cLOck SNOOZE When the ALARM CLOCK goes off, you can activate the SNOOZE function by pressing the SNOOZE button. Every time the SNOOZE button is pressed the ALARM CLOCK will go off again after 5 minutes. USING THE FLASHLIGHT Your FR1000 Series has a built-in FLASHLIGHT. To turn the FLASHLIGHT on, turn the F...