Войти:
Оценок - 2, средний балл: 3.5 ( )

Инструкция по эксплуатации Roland, модель MKS-10

Производитель: Roland
Размер: 238.24 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Press it once again, and the Chours will be off. b. Tremolo %/Fit These buttons, the % and the ru, behave just like the Chorus and the Ranger Buttons. Use the Flanger Button 4 in the same way. It is not possible to obtain both Chorus and Flanger effects at the same time. If you press the Flanger Button while the Chorus Button is turned on, the Chorus Button goes out and the Flanger Button lights up, the Flanger effect being turned on. To turn the Chorus effect at this stage, just press the Chorus Button again. The Flanger Button goes out and the Chorus Button lights, the Flanger effect turned off. In other words, the later pressed button has priority and comes on. D. RATE, DEPTH KNOBS Chorus/Flanger Trem olo % / ru These knobs control the rate and depth of each effect currently in use. E. OTHER CONTROLS a. Brilliance Knob As you raise this knob, the tone color becomes brighter. Normally, set it to the center position and change the position depending on the type of speaker or amplifier or the music you piay. c. Tune Knob Use this knob to tune the MKS-10 with other musical instrument. In its center position, the MKS-1 0 is tuned A=442Hz and changes up to r 50 cent. b. Volume Knob With this knob set between 3 and 7, adjust the volume knob on the amplifer and the Level Selector Switch to obtain desirable volume. l4 EXTERNAL CONTROLTO THE MKS-10 When program change message transmitted from an external device is received by the MKS-10, a combination program of a tone color and effect(s) is accordingly called Also, this Program Change Message enables you to use 8 "hidden tone colors" which cannot be called by pressing the MKS-10's Tone Selector Buttons Note) If you do not want the MKS-10 to receive the program Change message, hold down any Tone Color Selector Button except for 1, and switch the MKS-10 on without releasing the button. A. PROGRAM CHANGE MESSAGE The"hidden tone colors"are preset patches which can be in use just by MIDI program change message transmitted from the extenra! device, and they have the same tone colors as the 8 preset patches 1 to 8 on the MKS-1 0's front panel, but have different release times. For instance, PIANO I and II of the panel presets have rather long release times, and Clavi I and II short. The"hidden preset patches"are pianosounds with short release times and clavi sound with long release times, therefore sound completely different. a. Program Change Number 1 to 7 The program change numbers 1 to 7 correspond to the panel preset patches 1 to 7, b. Program Change Number 8 to 15 The program change numbers 8 to15 correspond to the 8 "hidden preset patches'.' * You can consider that there are 16 different preset tone colors. Program change numbers 16 to 127 can be used to add various effects to those 16 preset tone colors. Refer to the table below. MKS-10's Program Change Numbers and Corresponding Tone Colors and Effects. Tone Color— Effect PIA i NO ¡1 CL 1 AV! II HARPS I CH0R0 ¡1 E.PI I AND tl pifi *■ i ■i-i, [1 Cb 1 AVI 11 HARPS 1 CHORD il E.PI 1 ANO 11 NORMAL (No effect) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CHORUS 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 llllllif 32 33 34 35 36 37 38 39 ;?■ :«• 41 42 43 44 45 46 47 TREMORO % 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 TREMORO m 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 CHORUS 8. TREMORO % 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 CHORUS & TREMORO fU 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 FLANGER & TREMORO % 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 RELEASE Lon9 o o o O IIMt Short r;, O o o e.g.) Piano I with Flanger effect is called when the MKS-1 0 receives the Program Change 40 B. CONTROL CHANGE MESSAGE The control change message received by the MKS-10 selects whether to use or not a damper pedal and a soft pedal. Q 5i SPECIFICATIONS MKS-10: 16 VOICE PIANO MODULE ■ Front Panel • Tone Selector Buttons Piano I (1), Piano II (2), Clavi I (3), Clavi li(4). Harpsichord I (5), Harpsichord 11(6), Electric Piano I (7), Electric Piano i! (8) • Effects Chorus, Flanger, Tremolo %/ru • MIDI Channel Selector Buttons UP, DOWN • Power Switch • Controls Tune(± 50cent) Volume Brilliance Rate, Depth(Chorusr Flanger) Rate, Depth(Tremolo} • Display & Indicator MIDI Channel Display MIDI Message Indicator ■ Rear Panel MIDI IN Connector MIDI THRU Connector Output (Mono, Stereo) Jacks Level Selector Switch(H/M/L) • Consumptions 30W • Dimensions 480{W) x 400(D) x 90(H)mm 19"(W) x 1 5-3/4''{D) x 3-9/1 6"{H) ( 19” Standard Rack Mount type) • Weight 1Okg/41b 9oz • Accessories MIDI Cable{5P DIN) 1m/3'3" Connection Cord (LP-25)x2 Sound Module model MKS-10 MIDI Implementation Chart Transmitted Recognized Remarks Function........... : j 0i5 en Basic Default ¡ 1-16 memorized Channel Changed ! 1-16 ; Defauit ; ! 3 Mode Messages I POLY OMNI ON OFF A11 e r e d I ************** MON...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории