Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Main Features . A full 23-second long delay provides plenty of time for loop play and sound-on-sound. . The Memory function allows you to store up to four tones in the DD-20 itself, independent of the panel settings. You also get “seamless switching,” with memories switched smoothly as the reverberation continues. . Features a Delay mode with a total of eleven effects, including new “SMOOTH,” “TWIST” and some effects modeled on analog and tape echo effects. . The new “Time Advance function” provides quick, yet sensitive control of delay times. . Equipped with custom backlit LCD for clear, easy viewing of delay times, even on dark stages. Copyright © 2003 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION. Contents Contents Main Features................................... 1 Installing Batteries................ 3 Making the Connections ...... 4 Mono Connection.................................... 5 Stereo Connection ................................... 5 Connecting the Stereo Output and the Effects Processor...................................... 6 Connecting to SEND/RETURN ........... 6 With Guitar and Bass Amps........... 6 Connecting to an MTR or Mixer.... 7 Operation............................... 8 ON/OFF Pedal Operation..................... 8 Panel Operation....................................... 9 Storing Settings (Write Operation)..... 10 Storing the “MANUAL” Sound in Memory ........................................... 10 Changing and Storing the “MEMORY” Sound ....................... 12 MEMORY/TAP Pedal Operation (Switching Memories) .......................... 14 MEMORY/TAP Pedal Operation (Tap Input) ............................................. 15 Part Names and Functions 16 Front Panel............................................. 16 Operating the DELAY TIME Knob ..17 MODE List ...................................... 18 Rear Panel .............................................. 20 How to Use Each Mode.......21 How to Use SOS (Sound On Sound)...21 How to Use TWIST................................22 How to Use WARP................................22 How to Use TAPE..................................23 How to Use DUAL ................................24 How to Use MODULATE.....................25 How to Use the Tempo Function ...............................26 Indicating the BPM in the Delay Time Display .............27 Settings Made When the Power is Switched ON ........28 Global Procedures ..........................28 Changing the Pedal Mode Settings.....29 Setting the Output Mode ......................30 Setting the External Pedal Function....31 Changing How Memory Numbers Are Indicated .................................................33 Returning Settings to Their Factory Defaults ...................................................34 Troubleshooting..................35 Sample Settings ..................37 Setting Memo.......................40 Specifications......................41 Index.....................................42 3 Installing Batteries Batteries are supplied with the unit. The life of these batteries may be limited, however, since their primary purpose was to enable testing. Insert the included batteries as shown in figure, being careful to orient the batteries correctly. fig.02 • When turning the unit upside-down, get a bunch of newspapers or magazines, and place them under the four corners or at both ends to prevent damage to the buttons and controls. Also, you should try to orient the unit so no buttons or controls get damaged. • When turning the unit upside-down, handle with care to avoid dropping it, or allowing it to fall or tip over. • Make sure the “+” and “–” ends of the batteries are oriented correctly. • When the batteries run down, the POWER indicator gets dim. If this happens, replace with new batteries. • When replacing the batteries, use six AA type. • Avoid using new batteries together with used ones. In addition, avoid mixing different types of batteries. Doing so can result in fluid leakage. • Battery life can vary depending on battery type. Continuous usage time under battery power is about 7 hours with alkaline batteries and about 2 hours with carbon batteries. (This may vary according to usage conditions.) Making the Connections Making the Connections • The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type. • Noise may be produced if wireless communications devices, such as cell phones, are operated in the vicinity of this unit. Such noise could occur when receiving...