Войти:
Оценок - 3, средний балл: 3.7 ( )

Инструкция по эксплуатации Roland, модель CUBE-40XL

Производитель: Roland
Размер: 16.27 mb
Название файла:
Язык инструкции:
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


For details on connecting footswitches, refer to “FOOT SW” (p. 9). The memory of the CUBE-40XL and CUBE-80XL can record a phrase approximately 80 seconds long. When you reach the maximum recording time, recording will stop automatically and playback will start. 3. Press the [REC/PLAY/DUB] switch to stop recording. At the same time that you press the [REC/PLAY/DUB] switch, the [REC/ PLAY/DUB] switch lights in green and the recorded phrase will switch to playback. The phrase will continue playing repeatedly until you stop it. 4. To stop playback or overdubbing, press the [TAP/STOP] button. The phrase will stop playing. If you want to play again, press the [REC/PLAY/DUB] switch. MEMO If a phrase has already been recorded, the PLAY indicator will blink green. begin. 3. To stop recording, press the [REC/PLAY/DUB] switch. The [REC/PLAY/DUB] switch will light in green, and the phrase will play repeatedly from the beginning. 4. Press the [TAP/STOP] switch to stop playback. The [REC/PLAY/DUB] switch will blink green. Erasing the phrase 1. Hold down the [TAP/STOP] switch for two or more seconds. The [REC/PLAY/DUB] switch will blink red, and the phrase will be erased. * The erased phrase cannot be recovered. Using the LOOPER Function and Delay at the Same Time Using the LOOPER Function and Delay at the Same Time r function and the delay at the same time. Normally, you cannot use the delay when the [DELAY/LOOPER] knob is in the LOOPER position. However, if panel settings that use the delay are stored in the SOLO function, and you then turn SOLO on, you’ll be able to use the delay while using the LOOPER function. If you turn the SOLO function on while using the LOOPER function, and then switch between JC CLEAN and LEAD, you’ll be able to record your performance using the delay settings saved for each channel. * Switching the delay on or off or changing the delay time is not possible. Copyright * Recording, duplication, distribution, sale, lease, performance, or broadcast of copyrighted material (musical works, visual works, broadcasts, live performances, etc.) belonging to a third party in part or in whole without the permission of the copyright owner is forbidden by law. * Do not use this unit for purposes that could infringe on a copyright held by a third party. We assume no responsibility whatsoever with regard to any infringements of third-party copyrights arising through your use of this unit. 15 Nederlands Portugues Espanol Italiano Francais DeutschEnglish 16 Sample Settings * For information on how to set the delay time, refer to “DELAY/LOOPER” (p. 6) Extreme [SELECT] switch=LEAD CUBE-40XL CUBE-80XL [SELECT] switch=LEAD This is an extreme sound with intense distortion. This is a high-gain sound that packs a lot of punch in the low end, while delivering a great deal of edge in the upper range. You can obtain variations in the sound by moving the [...

Эта инструкция также подходит к моделям:
Музыкальные инструменты - CUBE 40XL (16.27 mb)
Музыкальные инструменты - CUBE 80XL (16.27 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории