Оценок - 0, средний балл: 4
(
)
)
|
Фрагмент инструкции
18. [TAP] Switch Use this to set the delay time. When you press the switch twice, the delay time will be set to the time interval at which you pressed the switch. The maximum length is 2000 ms. Setting the Delay Time for Short Delay If you hold down the switch for one second or longer, the delay time will be set to 30 ms. Each time you then press the [REC/PLAY/DUB] switch, the delay time will change over four steps (30 ms/50 ms/70 ms/90 ms) to a maximum of 90 ms. * The short delay cannot be set using the foot switch. To use the Looper function 16. [DELAY/LOOPER] Knob Set the knob in the Looper range to turn on the Looper function. The position of the knob within this range specifies the Looper function’s playback volume. 17. [REC/PLAY/DUB] Switch Use this switch to record, play back, and overdub. 18. [STOP] Switch This switch stops playback or erases the recording. If the [DELAY/LOOPER] knob is in the LOOPER range, this switch stops the Looper or erases the recording. * For details on using the Looper function, refer to ”Using the LOOPER” (p. 14) * When the knob is positioned at LOOPER, no delay effect is applied. To use the LOOPER and delay simultaneously, refer to”Using the LOOPER Function and Delay at the Same Time” (p. 15) [REVERB] [REVERB] . [REVERB] Knob You can switch between use of two types of reverb by changing the position of the knob. You can adjust the intensity of the effect by varying the knob position. The indicator lights up when reverb is on and goes out when the effect is off. You can also switch reverb on and off using an optional footswitch pedal. Knob Position Description SPRING This is modeled on spring reverb. It produces the distinctive reverberations of a spring. Turning the knob clockwise makes the effect progressively more intense. PLATE This is a plate reverb. This reverb features high-end sustain. Turning the knob clockwise makes the effect progressively more intense. POWER SQUEEZER (CUBE-40XL only) 20. [POWER SQUEEZER] Switch The switch lights in red when the power squeezer function is on and goes out when the power squeezer is off. Switching on the Power Squeezer function allows you to reduce the amp’s output to 2 watts. Switching this on allows you to produce a sound that preserves the same tone and balance at an output of 2 watts, for volume levels that are more suitable for the average home. * The Power Squeezer function affects only sounds input through the INPUT jack. It has no effect on sounds input via the AUX IN jack. POWER 21. [POWER] Switch This switches the power on and off. Switching the Power On and Off * Turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. 1. Make sure that all [VOLUME] knobs on the CUBE-40XL/CUBE80XL and all the connected devices are set to 0. 2. Turn on all the devices connected to the CUBE-40XL/CUBE80XL’s input jacks (INPUT jack and AUX IN jack). 3. Turn on the CUBE-40XL/CUBE-80XL. * Always make sure to have the volume level turned down before switching on power. Even with the volume all the way down, you may still hear some sound when the power is switched on, but this is normal, and does not indicate a malfunction. * This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally. 4. Adjust the volume levels for the devices. 5. Before switching off the power, lower the volume on all the connected devices and then TURN OFF the devices in the reverse order to which they were switched on. * If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the power outlet. Refer to Power Supply (p. 3). Nederlands Portugues Espanol Italiano Francais DeutschEnglish 8 Rear Panel Speaker Cable Recorder, etc. CD Player Digital Audio Player etc External Speaker INPUT REVERB EFX SOLO CH SELECT Foot switches Mixer, etc. Headphones CUBE-80XL 1 2 3 4 6 7 5 8 DELAY/REC/PLAY/DUB DELAY/REC/PLAY/DUB TAP/STOP TAP/STOP Recorder, etc. CD Player Digital Audio Player etc REVERB EFX SOLO CH SELECT Foot switches Headphones CUBE-40XL 6 1 2 3 8 RING TIP RING TIP RING TIP RING TIP RING TIP RING TIP B A FS-6 FS-5U RING TIP Settings for momentary-type foot switches * To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. FOOT S W By connecting a foot switch (BOSS FS-5U or FS-6; sold separately), you’ll be able to use your foot to switch between channels, turn EFX, Reverb, and Delay on/off, and control the Looper function. The connection diagram at left is a connection example that shows how to use a momentary-type foot switch (FS-5U, FS-6). For details on connections and settings when using a latch-type foot switch (BOSS FS-5L; sold separately), refer to”Using a Latch-type Foot Switch” (p. 10). 1. TIP: DELAY/REC/...
Эта инструкция также подходит к моделям:Музыкальные инструменты - CUBE 40XL (16.27 mb)
Музыкальные инструменты - CUBE-40XL (16.27 mb)