Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
indicator will light. When at on, the ■ H! ill ¡1!!! ¡1 HI m III II !!(!!!! Ill 1 Mil 11 Display Indicates the MIDI channel being used to transmit MIDI messages. Program numbers are indicated when Program Change messages are transmitted. Mode Buttons Provides selection from among the 4 modes determining how the note keys will function. Octave Buttons Determine the range the note keys will have. When at normal, the C/5 key will be C4 (Note number : 60). Note Keys - Provide transmission of note messages. They function differently depending on the mode. ' Chord Type Keys Used to specify the type of chord when note messages are transmitted. Control Fader Transmits the MIDI messages chosen with the Select button. Velocity Fader Adjusts the velocity level when note messages are transmitted. Root Note Keys Used to specify the root note when note messages for chords are transmitted. (2) Rear Panel Provides for connection of the supplied Connectors through which the MIDI Selects whether or not the messages AC adaptor. reception and transmission takes place. received at MIDI IN will be output from MIDI OUT. 4 1^ *!^ ^ ^ r^t i^> f^> f|»i r^y ^ f|< ^ f^> i|> ffr rfr »fe *^> ^ i^> t^t *^i ^«» ^ rfy rfo «^t r^y «^r* ffr» *^y I^> <^> r|*» *jr» 2. Before Starting Out (1 ) MIDI messages that the CN-20 transmits The CN-20 is capable of transmitting the MIDI messages explained below. • Note Keys Allow not only for simple transmission of notes corresponding to keys pressed, but also are used to transmit chords. Thus it is quite convenient for step recording with a computer or sequencer. Note Messages: Note On, Note Off, Velocity (strength of sound) Program Change Messages: Messages for changing sounds. • Control Fader Through operating the control fader, the following MIDI messages can be transmitted. Control (Control Number 16) : The function controllable varies depending on the sound module used Volume messages (Control Number 7) : Volume Pan messages (Control Number 10) : Orientation of sound image Modulation messages (Control Number 1) : Alterations in vibrato obtained by modulation lever or wheel. Pitch Bender messages : Modifications in pitch obtained with a bender lever or wheel. Aftertouch messages: Effect obtained by the aftertouch function. • Hold Button Hold messages (Control Number 64) (2) Making connections Depending on the way in which it is to be used, the CN-20 should be connected as shown below. • When used in combination with a sequencer and MIDI sound module 5 ^ ^ «■$?• *4^ *4? *4^ ^ ^ *4^ ^ *4^ *4^ *4^ *4^ *4^ *4* *4^ *4-* *4** ^ ^ *4* *4^ *4* ^p *4"* ^ *4^ *%* *4-* *4* *4** *4** *4^ ^ *4* *4* *4^ *%* ^ *4^ *4-* ^ *4* *4^ ^ *4** *4-* *4** *4* *4"* *4^ ^ *4-* *4^ 4* • When used together with a keyboard controller * Make certain that the CN-20's Merge switch is set at On when a MIDI device is connected to its MIDI IN. (3) Turning on power After confirming that all MIDI cables have been properly connected, turn on power to the connected MIDI device, then turn on the CN-20 power. (D Insert the power plug into the outlet (D Insert the adapter’s other plug into the DC IN jack. The power indicator will light. * Since the unit is equipped with a circuit protection device, it requires a brief interval after power is turned on before it can be operated. 6 гф» »ф» «ф» *ф> *ф* »ф» |ф* гф* <ф» »ф* *ф» »ф» »ф» *ф* »ф» #ф» »фч «ф» «ф* *ф» гф» »Ф» »ф» #ф* «ф* »ф% »ф» »ф* »ф» ♦ф* ф «ф» *ф* »ф* *ф» *ф| *ф» *ф» «ф* #ф* »ф* »ф* «ф* «ф» «ф* *ф» *ф» гф» #ф* #ф* *ф* «ф* *ф» »ф» *ф» »ф» 3. The Four Modes (1) How each mode works TheCN-20 is provided with 4 modes. The Note Keys will function as follows depending on the mode. • Note Event Mode The ordinary mode; note messages are transmitted for the keys pressed. • Chord Mode The root and type of chord is specified and the note messages for the chord are transmitted. • Program Change Mode Program Change (changes in sound) messages are transmitted. • MIDI Channel Mode For setting the MIDI channel upon which the CN-20 will transmit MIDI messages. (2) Changing modes The mode is selected by means of the Mode buttons. The indicator for a button pressed will light. When any Mode button that has had its indicator lit is again pressed, the indicator will go out, and the unit will then be in the Note Event mode. o CHORD o PGM О MIDI CH Note Event Mode CHORD O PGM О MIDI CH Chord Mode O CHORD PGM О MIDI CH Program Change Mode O CHORD O PGM MIDI CH MIDI Channel Mode 7 *ф» ф *ф» *ф» *ф* *ф* *ф» *ф« *ф* *ф* *ф* 'ф1 *ф* 'ф1 *ф* *ф* *ф* 'ф1 *ф* *ф* *ф* *ф* *ф* *ф* ‘ф* *ф* *ф* *ф* *ф* *ф* 'ф* *ф* *ф* *ф* *ф* *ф* *ф* *ф* *ф* *ф* *ф* *ф* *ф* *ф* *ф* *ф* *ф* *ф* ‘ф* *ф* *ф* *ф* *ф* *ф* 'ф* *ф* 4. Setting MIDI Channels The following steps are performed to set the MIDI channel upon which the CN-20 will transmit MIDI messages. ф Press the MIDI CH button so the MIDI channel mode is selected. Roland CN-eo ...