Войти:
Оценок - 3, средний балл: 5 ( )

Инструкция по эксплуатации Philips, модель HQ9171

Производитель: Philips
Размер: 5.48 mb
Название файла: e82b0ad3-ef4c-4c74-51ae-453e20c9cca0.pdf
Язык инструкции:enidms
Перейти к скачиванию



Фрагмент инструкции


The demonstration will start automatically. During the demonstration the appliance will be EnglisH automatically switched on 2 times.You can interrupt the demonstration by pressing the on/off button. Charging Make sure the appliance is switched off before you start charging it. Charging normally takes approx. 1 hour. You can also shave without charging by connecting the shaver to the mains. A fully charged shaver has a cordless shaving time of up to 30 days. Charging the appliance 1 Put the appliance plug in the shaver. 2 Put the powerplug in the wall socket. 3 Remove the powerplug from the wall socket and pull the appliance plug out of the shaver when the battery has been fully charged. Charging stand You can also charge the appliance by placing it in the charging stand. 1 Place the shaver properly in the plugged-in charging stand. 2 Lift the shaver from the stand without tilting it. , EnglisH Removing and inserting the clock 1 Turn the clock anticlockwise (1) (‘click’) and pull it out (2). 2 Insert the clock (1) and turn it clockwise (2) (‘click’). setting the time 1 Set the time by pressing the small button at the back of the clock. The time can only be set forward. Replacing the battery 1 Remove the cap.Then remove the battery by means of a miniature screwdriver. 2 Insert a new battery and put the cap back into place. 10 EnglisH Using the appliance Personal Comfort Control The Personal Comfort Control system allows you to adapt the shaver to your skin type. You can set the shaver to ‘Normal’ for a fast and comfortable close shave. You can set the shaver to ‘Sensitive’ for a comfortable close shave with optimal skin comfort. The ‘S’ position is best suited for sensitive skin. The ‘N’ position is best suited for normal skin. The in-between positions are suitable for skin types between normal and sensitive. HQ9190 only: the display shows the position selected. Shaving 1 Switch the shaver on by pressing the on/off button once. ,- - , ,, , EnglisH 11 When you switch the shaver on or off, all lights and symbols go on and then the remaining battery capacity is shown for a few seconds. 2 Move the shaving heads quickly over your skin, making both straight and circular movements. Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 3 Switch the shaver off by pressing the on/off button once. 4 Put the protection cap on the shaver every time you have used it, to prevent damage. Trimming For grooming sideburns and moustache. 1 Open the trimmer by pushing the slide downwards. The trimmer can be activated while the motor is running. 2 Closethetrimmerwithyourindexfinger. Cleaning and maintenance Clean the shaver when the tap symbol with blinking water drops appears on the display. Regular cleaning guarantees better shaving performance. -- The normal way to clean the appliance is to rinse the shaving unit and the hair chamber with hot water every time you have used the shaver. Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. Every day: shaving unit and hair chamber 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. 2 Press the release button to open the shaving unit. 3 Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time. Make sure the inside of the shaving unit and the hair chamber have been cleaned properly. 4 Rinse the outside of the appliance. 5 Close the shaving unit and shake off excess water. Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. 6 Open the shaving unit again and leave it open to let the appliance dry completely. You can also clean the hair chamber without water by using the brush supplied. 12 English EnglisH 13 Every six months: shaving heads 1 Open the shaving unit, turn the lock anticlockwise (1) and remove the retaining frame (2). 2 Clean the cutters and guards with the brush supplied. Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 3 4 Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit and turn it clockwise. Close the shaving unit. Trimmer Clean the trimmer every time you have used it. 1 2 3 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Clean the trimmer with the brush supplied. Lubricate the trimmer teeth with a drop of sewing machine oil every six months. 14 EnglisH Charging stand Never immerse the charging stand in water nor rinse it under the tap. You can clean the charging stand with a moist cloth. storage Put the protection cap on the shaver to prevent damage. Store the appliance in the luxury cassette/pouch or place the appliance in the chargi...

Эта инструкция также подходит к моделям:
Музыкальные инструменты - HQ9170 (5.48 mb)
Музыкальные инструменты - HQ9190 (5.48 mb)
Электробритвы - HQ9170/16 (5.48 mb)
Электробритвы - HQ9170/21 (5.48 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории