Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Select Omni if commands from all channels should be accepted. Select Off if the effect unit should not be controlled via MIDI. Select the setting 0 -127 if using MIDI devices that start counting program change commands from 0. Select the setting 1 -128 if using MIDI devices that start counting program change commands from 1. Table 3-16: FX Control Setup parameter DEVICE SETUP This dialog can be used for editing system parameters and checking system properties. Some menu entries (e.g. Display Brightness) can be edited in the Device Settings dialog after pressing the MENU/ENTER rotary encoder. Other entries (e.g. Firmware Info) will open another dialog when pressing the MENU/ENTER rotary encoder. POWERMATE3 Illustration 3-17: Device Setup dialog Screensaver Off Device Setup Personalize ENTER Tooltips On BACK ESC Display Brightness 100% Display Brightness The currently set display brightness (from 0% to 100%) is indicated in the right column. Press the MENU/ENTER rotary encoder to edit the value. Turn the MENU/ENTER rotary encoder to the left to decrease the display brightness. Turn the MENU/ENTER rotary encoder to the right to increase the display brightness. Press the MENU/ ENTER rotary encoder to apply the selected brightness. Pressing the BACK function key returns to the menu. Pressing the ESC function key returns to effect mode. Screensaver The currently set screensaver time interval is shown. After the time interval (from 10 seconds to 60 minutes) has expired the screensaver is activated. Press the MENU/ENTER rotary encoder to edit the value. Turn the MENU/ENTER rotary encoder to the left to shorten the time interval, or deactivate the screensaver by selecting Off. Turn the MENU/ENTER rotary encoder to the right to extend the time interval. Press the MENU/ENTER rotary encoder to apply the selected setting. Pressing the BACK function key returns to the menu. Pressing the ESC function key returns to effect mode. Personalize Press the MENU/ENTER rotary encoder to open the Set Device Name dialog. This dialog is used to change the PowerMate‘s name, which can be composed of a maximum of 18 symbols and consist of all letters A-Z, a-z, the numbers 0-9 and special characters. Turn the MENU/ENTER rotary encoder to the left or right to edit the highlighted character. Pressing the MENU/ENTER rotary encoder accepts the desired symbol and moves the cursor to the next character. Move the cursor to the left or to the right by pressing the . or . function keys. Select the . symbol or press the OK function key to quit editing the name. Pressing the BACK function key returns to the menu. Pressing the ESC function returns to effect mode. Tooltips The indication of Tooltips, e.g. when opening the Speaker Protection dialog, can be activated or deactivated. Press the MENU/ENTER rotary encoder to edit the setting. Turn the MENU/ENTER rotary encoder to select On if Tooltips should be displayed. Select Off if Tooltips should not be displayed. Press the MENU/ENTER rotary encoder to apply the selected setting. Pressing the BACK function key returns to the menu. Pressing the ESC function key returns to effect mode. Play USB to 2TRACK Select „enable“ if the DIGITAL AUDIO INTERFACE should be used for playback of background music - e.g. using a PC/Mac - in STANDBY mode. HINT: If Play USB to 2TRACK is enabled a confirma tion prompt appears in the display when acti vating STANDBY mode. Press the MENU/ENTER rotary encoder to confirm. If „disable“ is selected the signal received via the DIGITAL AUDIO INTERFACE is muted in STANDBY mode. Pressing the BACK function key returns to the menu. Pressing the ESC function key returns to effect mode. Factory Reset The PowerMate can be reset to factory settings. Pressing the MENU/ENTER rotary encoder opens a clear user FX dialog box that lets the user choose between YES or NO by turning the MENU/ENTER rotary encoder. Select YES if all user effects should be cleared. Select NO if the user effects should not be cleared. Pressing the MENU/ENTER rotary encoder opens a safety dialog box „Are you sure?“ that lets the user choose between YES or NO by turning the MENU/ENTER rotary encoder. If YES has been selected, pressing the MENU/ENTER rotary encoder resets the PowerMate to its factory settings. If NO has been selected, all parameters stay unchanged and the display returns to the menu. Pressing the BACK function key returns to the menu. Pressing the ESC function key returns to effect mode. The following table lists all parameters that are affected by a reset. Parameter Value USB Record Routing Live Equalizer Routing Left and right channel of master output LPN Processing High Speaker Protection Power Control off (deactivated) Footswitch Ctrl. FX 1+2 TAP Button Ctrl. FX 1+2 FX 1 Start Preset 5 FX 2 Start Preset 55 FX 1 MIDI Channel Off FX 2 MIDI Channel Off MIDI PrgCh Count 1 - 128 Display Brightness 100% Screensaver Off Device Name PowerMate Tooltips On (activated) Play USB to 2TRACK Disable Table 3-18: Fac...
Эта инструкция также подходит к моделям:Музыкальные инструменты - 1000-3 (4.91 mb)
Музыкальные инструменты - 1600-3 (4.91 mb)