Оценок - 8, средний балл: 4.6 ( )

Производитель: Dynacord Размер: 4.91 mb Название файла: Язык инструкции:

27 - SIG/PK The stereo SIG/PK indicator function provides independent analysis of left and right channel audio signals. The respective highest level reading is indicated, assuring that neither one is already driven into clipping. For further information on how to use this indicator most efficiently, please refer to the description of the monaural channel’s identical feature. 28 - FADER The channel fader is used to simultaneously adjust both levels (volumes) of the stereo signal. Functioning and specifications are totally similar to the monaural channel fader, as previously described under INPUT/MONO. POWERMATE3 2.3 FX 1/2 The PowerMate offers two independently controllable, identically configured 24-bit stereo effect units – FX 1 and FX 2. Each unit provides 100 program presets, which are selected by the use of the UP/ DOWN buttons. Parameters of presets can be edited and stored as User Preset (101 - 120), see page 30 for details. The 100 presets are divided into groups according to their different effect structure, as shown on a printed listing. The programs within each preset group are sorted in ascending order, where higher numbers provide the same FX type with increased intensity. Presets 1 - 20 offer high quality reverberation effect programs that are equally suitable for live performance, recording studio or home recording applications. Program numbers 21 - 40 provide mixed effect types of echo+reverb and chorus while the numbers 41 - 60 offer different delay effects. The last group from 61 - 100 provides different doubling effects presets as well as special delay and reverb programs. During the initialization of the FX units (when switching on the power of the PowerMate), preset 05 (BRIGHT HALL, Large Hall 3) is selected for the FX 1 while the FX 2 unit is set to preset 55 (MONO DELAY, 230 ms 40%). These two effects are similarly suitable for live performances and recording applications. This is the factory-preset configuration that can be changed any time. Illustration 2-17: Effect mode BRIGHT HALL MONO DELAY MAX LPN HIGH USB MIDI 5 55 Large Hall 3 230 ms 40% FX1 FX2 The buttons below the display are used in menu mode also, please see page 25 for details. SELECTING A PRESET To select a preset, pleace proceed as follows: 1. Below the display there are two buttons for each effect unit. 2. Use the DOWN button (left) of an effect unit to decrease the number of the active preset. Use the UP button (right) of an effect unit to increase the number of the active preset. 3. Keeping a button pressed continuously lets you step quickly through the program numbers. 4. Press the UP and DOWN button simultaneously to select the first preset of the next effect group. The two effect programs are equally suitable for live performance or recording applications and can be used separately or together. For testing, evaluating and selecting effect programs, please also refer to the preset table on page 34, which provides detailed description of all effect presets. This listing contains all preset names together with the corresponding effect structure, field of application, and frequency characteristics. Take your time to test all presets and select the ones that are best suited for your specific application. 29 - FX ON/OFF Phone jack for the connection of an optionally available DYNACORD FS 11 (DC-FS11) footswitch to switch the effect mode of the internal FX units on or off. To accomplish this function, the FX 1 and FX 2 ON switches have to be engaged. HINT: The function of the footswitch can be edited via the Footswitch Ctrl. entry in the FX Control Setup dialog, see page 32 for details. 30 - FX 1/2 SENDS SOCKET The audio signal of the mix that you have established for the corresponding FX bus – the identical mix that is fed to the internal FX 1/2 units – is present at this socket, which makes it perfect for connecting external FX units, for example. The external devices output signals can be sent back to the PowerMate via stereo channel input. 31 - FX 1/2 SEND CONTROL Setting the level at the FX 1/2 SENDS sockets is possible by means of the corresponding FX SEND control. 18 POWERMATE3 32 - FX1/2 TO AUX1/2 These controls allow adding the output signal (pre fader) of FX 1 or FX 2 to the AUX 1 or AUX 2 channel. 33 - FX1/2 TO MON1/2 These controls allow adding the output signal of FX 1 or FX 2 to the MON 1 or MON 2 channel. Experience has revealed that the effect level in the monitor mix has to be lower than the level in the master mix, since the distance between monitor speakers and artists is much shorter. 34 - PK LED These indicators signal if the internal FX units or the FX 1/2 SENDS signals are on the verge of clipping. To achieve an adequate S/N ratio, please adjust the FX units’ input level as follows: FX input level setting instructions: 1. Establish a “dry” mix – without effect settings – according to the previous descriptions. 2. Position the effect return fader of the corresponding effect channel at the -5 dB mark...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: