Оценок - 3, средний балл: 4 ( )

Производитель: Roland Размер: 20.08 mb Название файла: Язык инструкции:

NOTE • Only MIDI data can be transmitted or received via USB. • Power-on the OCTAPAD before starting the MIDI application on your computer. Do not turn the OCTAPAD’s power on or off while your MIDI application is running. USB driver settings Normally it will not be necessary to install a USB driver in your computer. However if you experience problems with the computer connection (if a malfunction occurs, or if the performance is poor), you may be able to solve the problem by downloading and installing Roland’s original driver as described below. 1. In the OCTAPAD’s SYSTEM-MIDI screen, change the “USB Driver” (p 65) setting to “VENDER ” 2. Turn the OCTAPAD’s power off, and then on again 3. Download and install the original Roland driver For details on downloading and installing the original Roland driver, refer to the Roland website. s Internal Pad Settings (PAD SETTING-INTERNAL) Here’s how to adjust the sensitivity of the internal pads. Choose MENU UPAD UINTERNAL (p 16) The PAD SETTING-INTERNAL screen appears. Hit a pad to select the pad whose settings you want to edit Turn [Knob 1] (SEL) to select a parameter Turn [Knob 3] (–/+) to edit the value The following parameters are common to pads 1–8. Parameter Value Explanation Sensitivity -9–+9 You can adjust the sensitivity of the pads to accommodate your personal playing style. This allows you to have more dynamic control over the sound volume, based on how hard you play. Higher sensitivity allows the pad to produce a loud volume even when played softly. Lower sensitivity will keep the pad producing a low volume even when played forcefully. Trigger meter. This indicates the velocity value. Hit a pad to select the pad whose settings you want to edit. [Knob 1] (SEL) selects a parameter. [Knob 3] (–/+) edits the value. 1. 2. 3. 4. Adjust this curve until the response feels as natural as possible. Volume The standard setting. This produces the most natural LINEAR correspondence between playing dynamics and volume change. Playing LINEAR Dynamics Volume Volume Compared to LINEAR, strong dynamics produce a EXP1, EXP2 greater change. Playing Playing EXP1 Dynamics EXP2 Dynamics Volume Volume Velocity Curve Compared to LINEAR, a soft playing produces a greater LOG1, LOG2 change. Playing Playing LOG1 Dynamics LOG2 Dynamics SPLINE Extreme changes are made in response to playing dynamics. SPLINE Playing Dynamics Very little dynamic response, making it easy to LOUD1, LOUD2 maintain strong volume levels. If you’re using a drum trigger as an external pad, these settings will produce reliable triggering. LOUD1 Dynamics LOUD2 Playing Dynamics Volume Volume Volume Playing This setting allows a trigger signal to be received only when the pad is above a determined dynamic level (velocity). This can be used to prevent a pad from sounding because of vibrations from other pads. In the following example, B will sound but A and C will not sound. Threshold Threshold -9–+9 Overview Basic Adv. 1 (Kit) Adv. 2 (Phrase) Adv. 3 ( Other) Appendix When set to a higher value, no sound is produced when the pad is struck lightly. Gradually raise the “Threshold” value while striking the pad. Check this and adjust accordingly. Repeat this process until you get the perfect setting for your playing style. External Pad and Pedal Settings Connecting Optional Pads or Pedals The OCTAPAD lets you connect a hi-hat control pedal (FD-8), kick trigger or pads to the external trigger inputs. The illustration below shows a typical set of connections, but there are many possibilities; like connecting two kick pedals to the 1/KICK input and the 2/SNARE input. After connecting any external pads or pedals, you need to set the appropriate Pad Type as described below. 4/RIDE 3/HI-HAT 2/SNARE 1/KICK HH CTRL V-cymbal Cymbal pad V-pad Kick trigger pad Hi-hat control pedal (e.g., CY-12R/C) (e.g., CY-5) (e.g., entire PD series) (e.g., KD-8, KD-7) (FD-8, VH-11) * To make connections, use the cable included with each pad External Pad Settings (PAD SETTING-EXTERNAL) Here’s how to make settings for external pads. 1. Choose MENU • PAD • EXTERNAL (p 16) The PAD SETTING-EXTERNAL screen appears. Hit a pad to select the pad whose settings you want to change. Trigger meter, and type of each pad. Three sets of external pad settings can be stored (banks 1–3). Turn [Knob 2] (BANK) to change banks. [Knob 1] (SEL) selects a parameter. Press [Button 3] (NAME) to go to a screen where you can assign a bank name (p. 35). Turn [Knob 3] (–/+) to edit the value. 2. Hit an external pad (or step on a pedal) to select the pad whose settings you want to edit 3. Turn [Knob 1] (SEL) to select a parameter 4. Turn [Knob 3] (–/+) to edit the value About banks You can store three different external pad configurations. These are called Banks (banks 1–3). Turn [Knob 2] (BANK) to change banks. Press [Button 3] (NAME) to access the screen where you can name the specific bank (p. 35). Specifying the External Pad Type (PAD TYPE) The “Pa...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: