Оценок - 2, средний балл: 3 ( )

Производитель: Roland Размер: 20.08 mb Название файла: Язык инструкции:

Select Inst A. Select Inst B. (This will not work if Inst Layer Type is “OFF”) Turn [Knob 3] (–/+) to modify the value. 2. Play any pad whose Inst you want to change 3. Turn [Knob 3] (–/+) to select an Inst Press [Button 2] (PREVIEW) to audition the Inst. Turn [Knob 2] (GROUP) to select the Inst group. Turn [Knob 3] (–/+) to select an Inst. Press [Button 3] (OK) to confirm the selected Inst. List of Inst groups KIK Kick (bass drum) PC1 Percussion with heads SNR Snare drum PC2 Metallic percussion TOM Tom-tom PC3 Miscellaneous percussion HH Hi-hat cymbal PC4 Melodic percussion RD Ride cymbal MEL Pitched instruments CYM Crash cymbal SFX Sound effects OFF Off 4. Repeat steps 2–3 to select the Inst for other pads 5. Press the [BACK] button to return to the KIT screen Information on layer and other parameters, can be found here: “Inst Settings (INST)” (p. 30) You can exchange data between the pads. Refer to “Exchanging Pads (PAD EXCHANGE)” (p. 36). 02 Selecting an Inst (INST) 03 MULTI EDIT 03 MULTI EDIT Pushing the Multi Edit button gives you access to 10 different editing parameters. (See the chart below) 1. In the KIT screen, press [Button 2] (MULTI EDIT) The Multi Edit screen appears. Here you can see all the relative values assigned to each pad and external trigger input. The changes you make are saved in the kit. You can’t edit a kit whose “Kit Protect” (p. 34) is on. Name of the parameter you’re editing Indicates the pad you’re editing and will change when you play a pad. Value of each pad (Inst A is above, Inst B is below) Values for external trigger inputs 1–4 (Head is above, Rim is below) Use [Knob 2] (B) to change the value of Inst B (Rim). Use [Knob 3] (A) to change the value of Inst A (Head). Press [Button 3] (ALL) to copy the current value to all pads and external triggers. Turn [Knob 1] (PARAM) and a popup list appears select a parameter here. 2. Turn [Knob 1] (PARAM) to select the parameter and press [Button 3] (OK) to confirm your choice Parameter Value Explanation Negative (“-”) values will lower the pitch; positive (“+”) values will raise the pitch. The value will change Tuning -2400–+2400 in steps of 10 as you turn the knob. Coarse Tune -2400–+2400 This is the same as Tuning, but the value will change in steps of 100 as you turn the knob. Muffling 0–50 Increasing the value will decrease the resonance and decay. Soft Attack Tone Color 0–50 L50–H50 Specifies the sharpness of the attack. Increasing the value will soften the sound’s attack. Modifies the brightness of the sound. Higher settings will produce a brighter sound. Pitch Sweep -100–+100 Positive (“+”) settings will make the pitch change from high to low. Negative (“-”) settings will make the pitch change from low to high. Volume 0–100 Specifies the volume. Pan L15–CTR–R15 Specifies the pan position. CTR is center. Reverse OFF, ON If this is ON, the pad’s sound will play backward. * Some Insts will NOT play in reverse FX Send 0–100 or OFF, ON Determines the send level to FX (effect). Adjust accordingly. 3. Hit a pad to select it for editing • If you want to edit multiple pads at the same time, hold down [Button 1] (MULTISEL) and play the desired pads. • If you hit a pad that is not selected, it will cancel the multi selection. To stay in this multi selection mode, only play the pads you have selected. 4. Use [Knob 3] (A) or [Knob 2] (B) to edit the value • [Knob 3] (A) changes the value for Inst A (Head). • [Knob 2] (B) changes the value for Inst B (Rim). 5. Press the [BACK] button to return to the KIT screen If you want to adjust the pad’s sensitivity, refer to “Internal Pad Sensitivity Settings” (p. 59). 24 Effects Editing (AMBIENCE and FX) For an overview of the effects, refer to “What are Ambience and FX?” (p. 9). AMBIENCE 1. Choose MENU • AMBIENCE • AMBIENCE (p 16) The AMBIENCE screen appears. Use [Knob 1] and [Knob 3] to switch ambience on/off or change its type. MEMO Turns ambience on/off Ambience type Use [Knob 1] (SEL) to select a parameter. Ambience depth Turn [Knob 3] (–/+) to edit the value. In the KIT screen, you can also turn ambience on/off by using QUICK MENU UAmbience ON/OFF. FX 1. Choose MENU • FX • TYPE (p 16) The FX screen appears. Use [Knob 3] to switch the FX type. Pad for which FX will apply FX type Use [Knob 3] (TYPE) to display the FX type list. [Button 3] (BYPASS) temporarily turns FX off. A diagram of the selected FX type will appear. Using the knobs to control FX 1. Press the [FX CTRL] button The FX CONTROL screen appears. You can use [Knob 1]–[Knob 3] to control the FX parameters. The most suitable parameters for the effect will automatically be assigned to the knobs. Changes you make in the FX CONTROL screen are not saved to the kit. Use [Button 1] (SEND) to move to a screen in which you can adjust each pad’s send level. FX type Pad for which FX is enabled Use [Knob 1–3] to edit the effect parameters. [Button 3] (BYPASS) temporarily turns FX off. For details on how to edit each parameter, refer to “AMBIENCE” (p...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: